1. Catalogs
  2. RED JACKET
  3. BRJ2DF R3 2DF Submersible Dewatering Pump 2? NPT Discharge Wastewater

BRJ2DF R3 2DF Submersible Dewatering Pump 2? NPT Discharge Wastewater

BRJ2DF R3 2DF Submersible Dewatering Pump 2? NPT Discharge Wastewater

BRJ2DF R3 2DF Submersible Dewatering Pump 2? NPT Discharge Wastewater

Product catalog summary
Features
  • Impeller: Made of polyurethane for enhanced wear and corrosion resistance.
  • Adjustable Discharge: Can be installed vertically or horizontally with two screws.
  • Diffuser: Polyurethane construction for durability.
  • Mechanical Seal: Dual seals with silicon carbide outer seal for leakage protection.
  • Rubber Liner: Protects against wear around the impeller.
  • Bottom Strainer: Made of EPDM rubber, allows low pump down.
Applications
  • Designed for water removal from drainage ditches, trenches, basements, manholes, and excavation sites.
Specifications
  • Pump: 2" NPSM discharge, up to 84 GPM capacity, 51 feet total head, 95ºF temperature limit, 16.5 feet immersion depth.
  • Motor: Single phase, 3500 RPM, available in 1/2 HP and 1 HP, 115 and 230 V, with built-in starter and overload protection.
Agency Listings
  • Tested to UL778 and CSA 22.2 108 standards by Canadian Standards Association.
Replacement Kits
  • Impeller Kit, Diffuser Kit, Outer Seal Kit, and O-ring Kit available for maintenance.
Dimensions
  • Height: 17.25 inches, Weight: 26-32 lbs depending on model.
Model Information
  • Order numbers and specifications for 1/2 HP and 1 HP models, including voltage and maximum amp details.
Components
  • List of components with availability status, including impeller and suction cover/diffuser.
See more

Catalog excerpts

BRJ2DF R3 2DF Submersible Dewatering Pump 2? NPT Discharge Wastewater-1

FEATURES Impeller: Polyurethane for wear and corrosion resistance. Adjustable Discharge: Discharge can be installed for either vertical or horizontal installation using only 2 screws. Diffuser: Polyurethane for wear and corrosion resistance. Mechanical Seal: Dual seals for double leakage protection, outer seal – silicon carbide. Rubber Liner: Protects against wear around impeller. Bottom Strainer: Made of impact absorbing EPDM rubber, suction holes allow for low pump down. SUBMERSIBLE DEWATERING PUMP 2" NPT DISCHARGE

 Open the catalog to page 1
BRJ2DF R3 2DF Submersible Dewatering Pump 2? NPT Discharge Wastewater-2

Red Jacket Water Products Wastewater APPLICATIONS • Temperature limit: 95ºF (35º C) maximum Specifically designed to remove water from: • Depth of immersion: 16.5 feet (5m) maximum • Drainage ditches • Trenches • Basements • Manholes • Excavating drainage in the building trades • Built-in starter with full overload and temperature protection. SPECIFICATIONS Pump: • Discharge size: 2" NPSM threaded hose coupling • Class F insulation. • Air filled design. • Upper and lower heavy duty ball bearing construction. • Capacities: up to 84 GPM • Total heads: up to 51 feet • Maximum solids: any particles...

 Open the catalog to page 2
BRJ2DF R3 2DF Submersible Dewatering Pump 2? NPT Discharge Wastewater-3

Red Jacket Water Products Wastewater REPLACEMENT KITS Each kit contains the following parts: Impeller Kit (15K97 for 1⁄2 HP, 15K98 for 1 HP) – Impeller, impeller screw, protective plug, washer, assembly instruction Diffuser Kit (15K99 for both 1⁄2 HP and 1 HP) – Diffuser, barrel nuts, screws, washers, assembly instruction, sticker Outer seal Kit (15K14 for both 1⁄2 HP and 1 HP) – Mechanical face-seal unit, assembly instruction, sticker O-ring Kit (15K100 for both 1⁄2 HP and 1 HP) – All o-rings MODEL INFORMATION Order No.

 Open the catalog to page 3
BRJ2DF R3 2DF Submersible Dewatering Pump 2? NPT Discharge Wastewater-4

Description Discharge Power cord Handle/cover Support bearing Pump casing Main bearing Inner mechanical seal Outer mechanical seal Impeller Suction cover/diffuser Strainer Oil plug Motor Not Available Not Available Not Available Not Available Not Available Not Available Not Available Available Available Available Not Available Not Available Not Available Xylem Inc. 2881 East Bayard Street Ext., Suite A Seneca Falls, NY 13148 Phone: (866) 325-4210 Fax: (888) 322-5877 www.xyleminc.com/brands/redjacketwaterproducts Red Jacket Water Products are trademarks of Xylem Inc. or one of its subsidiaries....

 Open the catalog to page 4

All RED JACKET catalogs and technical brochures

  1. Grizzly

    2  Pages

  2. BRJVS R1

    4  Pages

  3. BRJ4BFLO R2

    8  Pages

  4. BRJBS R4

    4  Pages

  5. BRJCQUICK R3

    4  Pages

  6. BRJEZ R3

    2  Pages

  7. P2WW05

    4  Pages

  8. Enduro

    12  Pages

  9. E518/E610

    2  Pages

  10. RSDS & RWC5P

    4  Pages

  11. BPROPAKRJ

    12  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.