Power Modules
5Pages

Features Regulated Converters Class B EMC Filter built-in Reverse Polarity Protected Inrush Current Limiting (Soft Start) Output Trim Potentiometer Output LED Indicator DIN Rail Mounting or Panel Mount Options DC/DC Converter Power Module Power Modules 15-60 Watt 3 Single, Dual & Triple Outputs 3Y Description The Recom Power Module takes a standard 15W-60W converter and mounts it on a PCB with screw terminals, an EMC filter, input protection circuitry and a built-in heatsink to offer a complete power module that can be mounted on a bulkhead or on a standard DIN rail. The Power Module is primarily designed for transport applications such as a GPS vehicle tracking power supply or a radio communications power supply, but will also find many uses in industrial, communications or battery-powered applications. How to use this datasheet: 1. Select the converter that suits your application from the converter series list below 2. Decide on DIN Mount (RPMD) or bulkhead (RPM) version Ordering example: 40W, 18-75 VDC in, single 12Vout, DIN Mount = RPMD40-4812SGW xx = Output Voltage Options Single Outputs: 3.3S = 3.3V 05S = 5V 12S = 12V 15S = 15V Dual Outputs: 12D = ±12V 15D = ±15V Refer to converter series datasheets for detailed information. Notes: Note1: add „/N“ for Negative CTRL Logic Note2: no suffix for Positive CTRL Logic

DC/DC Converter Selection Guide Single and Dual Outputs - DIN Rail Version Power Module Series Notes: Note1: add „/N“ for Negative CTRL Logic Note2: no suffix for Positive CTRL Logic Notes: Note2: no suffix for Positive CTRL Logic Notes: Note2: no suffix for Positive CTRL Logic

Power Module Series DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted Specificatins are as in individual converter datasheets with the following exceptions: Bulkhead Version BASIC CHARACTERISTICS Parameter Inrush current nominal Vin and full load Start-up time ENVIRONMENTAL Parameter Thermal Impedance SAFETY AND CERTIFICATIONS IEC General Safety EN General Safety Standard / Criterion ESD Radiated Immunity Fast Transient Surge Conducted Immunity EN61000-4-2, Criteria A EN61000-4-3, Criteria A EN61000-4-4, Criteria A EN61000-4-5, Criteria A...

Power Module Series DC/DC Converter Selection Guide typical at nominal input and 25°C unless otherwise noted Specificatins are as in individual converter datasheets with the following exceptions: PACKAGING INFORMATION Parameter Packaging Dimensions Packaging Quantity DIN-Rail Version BASIC CHARACTERISTICS Parameter Inrush current nominal Vin and full load Start-up time ENVIRONMENTAL Parameter Thermal Impedance SAFETY AND CERTIFICATIONS IEC General Safety EN General Safety Standard / Criterion EN55022, Class B ESD Radiated Immunity Fast Transient Surge Conducted Immunity EN61000-4-2,...

Power Module Series DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted DIN Rail Version (mm) 125.0 116.3 8 Notes: Note3: Trim option depending on converter series, please check datasheet of the converter series PACKAGING INFORMATION Parameter Packaging Dimensions Packaging Quantity The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is...