- Catalogs
- RECKON DRIVES INTERNATIONAL S.A.S.
- 171016 RACKS CATALOG
171016 RACKS CATALOG
171016 RACKS CATALOG
Reckon Drives International S.A.S specializes in high precision racks and pinions, offering products that ensure high value for money. Their racks are interchangeable and come with detailed inspection reports.
- Precision: Inspected using advanced software, ensuring flatness, straightness, and precision of faces.
- Material Quality: Uses stabilized materials to prevent precision loss due to residual stress.
- Safety: Chamfering of teeth to prevent injuries.
- Heat Treatment: Regular checks and conservative hardness values to ensure reliability.
- Aesthetics: Focus on visual quality.
- Packaging: Complies with international shipping requirements and includes anticorrosive oil protection.
The document details various specifications for different types of racks, categorized by DIN standards and material types:
- DIN 10 C45 50 HRC: Available in both helical and straight teeth, with induction-hardening and decorative black coating.
- DIN 9 C45: Features quenched material with options for helical and straight teeth.
- DIN 8 42CrMo4: Offers both helical and straight teeth, with quench treatment.
- DIN 6 C45 50 HRC: Ground teeth with induction hardening.
Cumulative pitch errors are provided for different modules and DIN standards, indicating the precision level of the racks.
Models can be ordered with or without holes, and custom sizes and modules are available upon request. 2D/3D drawings can also be requested.
For further inquiries, Reckon Drives can be contacted via their website or email.
The document provides detailed specifications for various gear models categorized under DIN 5 and DIN 6 standards. The gears are available in different modules (M), lengths (L), and number of teeth (Z). The materials used are C45 with induction hardening applied to the teeth, achieving a hardness of 50-55 HRC. The gears feature either helical or straight teeth, with specific pressure angles and helix angles for helical gears.
The teeth are ground to specific DIN standards (DIN 5e22 and DIN 6e25) with a pressure angle of 20°. The sides and bottom of the teeth are ground to a surface roughness of Ra=0.8. The document specifies that each model can be ordered without holes by replacing "H1" with "H0" in the reference.
The gears conform to DIN 5 and DIN 6 standards, with specific cumulative pitch errors (CPE) detailed for each model over a length of 300mm.
The document suggests that other sizes and modules are available upon request, and 2D/3D drawings can be provided. It is recommended to specify the desired configuration when ordering.
The tables in the document list various gear models with parameters such as module (M), length (L), number of teeth (Z), and cumulative pitch error (CPE). Key dimensions and specifications are provided for each model, allowing for precise selection based on application requirements.
Catalog excerpts
RECKON DRIVES INTERNATIONAL S.A.S 3 rue JC Milleret, Immeuble Horizon, 42000 SAINT ETIENNE France www.reckondrives.com [email protected]
Open the catalog to page 1
All our racks are interchangeable When it comes to rack quality, choosing Reckon® ensures that the following aspects are seriously taken care of: - Toothing precision is inspected on a CMM with last generation rack-inspection software and our racks are delivered to you with detailed inspection reports showing: o Flatness o Straightness o individual and cumulative pith errors o the precision of the faces towards teeth and bottom - Material quality, as Reckon® only selects stabilized material from the best suppliers, so you do not suffer from any low of precision due to residual stress release. -...
Open the catalog to page 5
Teeth milled to DIN 10h27, pressure angle 20° Mounting side and bottom milled (Ra=3.2) Material: C45 Heat treatment: induction-hardening on teeth only (50-55 HRC) Decorative black coating (thickness under 3^m) Each model hereabove can be ordered without holes by simply replacing “H1” by “H0” at the end of the reference. All dimensions are mm. Other sizes and modules available upon request. 2D/3D Drawings available upon request (1) : M = Module / (2) : Z = Number of teeth / (3) : H = Number of holes / (4) : CPE = Cumulative Pitch Error on 300mm
Open the catalog to page 7
DIN 10 50-55 HRC HELICAL TEETH Teeth milled to DIN 10h27, pressure angle 20° Right or left-hand, helix angle 19°31'42" Mounting side and bottom milled (Ra=3.2) Material: C45 Heat treatment: induction-hardening on teeth only (50-55 HRC) Decorative black coating (thickness under 3^m) Each model hereabove can be ordered without holes by simply replacing “H1” by “H0” at the end of the reference. All dimensions are mm. Other sizes and modules available upon request. 2D/3D Drawings available upon request (1) : M = Module / (2) : Z = Number of teeth / (3) : H = Number of holes / (4) : CPE = Cumulative...
Open the catalog to page 8
DIN 9 C45 HELICAL TEETH Teeth milled to DIN 9h25, pressure angle 20° Right or left-hand, helix angle 19°31'42") Sides and bottom milled (Ra=3.2) Material: C45 (quenched) Each model hereabove can be ordered without holes by simply replacing “H1” by “H0” at the end of the reference. All dimensions are mm. Other sizes and modules available upon request. 2D/3D Drawings available upon request (1) : M = Module / (2) : Z = Number of teeth / (3) : H = Number of holes / (4) : CPE = Cumulative Pitch Error on 300mm
Open the catalog to page 10
Teeth milled to DIN 8e27, pressure angle 20° Mounting side and bottom ground (Ra=0.8) Material: 42CrMo4 Heat treatment: quench (15-20 HRC) Each model hereabove can be ordered without holes by simply replacing “H1” by “H0” at the end of the reference. All dimensions are mm. Other sizes and modules available upon request. 2D/3D Drawings available upon request (1) : M = Module / (2) : Z = Number of teeth / (3) : H = Number of holes / (4) : CPE = Cumulative Pitch Error on 300mm
Open the catalog to page 11
DIN 8 42CrMo HELICAL TEETH Teeth milled to DIN 8e27, pressure angle 20° Right or left-hand, helix angle 19°31'42" Mounting side and bottom ground (Ra=0.8) Material: 42CrMo4 Heat treatment: quench (15-20 HRC) Each model hereabove can be ordered without holes by simply replacing “H1” by “H0” at the end of the reference. All dimensions are mm. Other sizes and modules available upon request. 2D/3D Drawings available upon request (1): M = Module / (2) : Z = Number of teeth / (3) : H = Number of holes / (4) : CPE = Cumulative Pitch Error on 300mm
Open the catalog to page 12
Teeth ground to DIN 6e25, pressure angle 20° Sides and bottom ground (Ra=0.8) Material: C45 Heat treatment on teeth only: induction hardening (50-55 HRC)
Open the catalog to page 13
DIN 6 50-55 HRC HELICAL TEETH Teeth ground to DIN 6e25, pressure angle 20° Right or left-hand helix, angle 19°31'42" Sides and bottom ground (Ra=0.8) Material: C45 Heat treatment on teeth only: induction hardening (50-55 HRC) REFERENCE M(,) Each model hereabove can be ordered without holes by simply replacing “H1” by “H0” at the end of the reference. All dimensions are mm. Other sizes and modules available upon request. 2D/3D Drawings available upon request (1) : M = Module / (2) : Z = Number of teeth / (3) : H = Number of holes / (4) : CPE = Cumulative Pitch Error on 300mm
Open the catalog to page 14
Teeth ground to DIN 5e22, pressure angle 20° Sides and bottom ground (Ra=0.8) Material: C45 Heat treatment on teeth only: induction hardening (50-55 HRC)
Open the catalog to page 15
DIN 5 50-55 HRC HELICAL TEETH Teeth ground to DIN 5e22, pressure angle 20° Right or left-hand helix, angle 19°31'42" Sides and bottom ground (Ra=0.8) Material: C45 Heat treatment on teeth only: induction hardening (50-55 HRC) Each model hereabove can be ordered without holes by simply replacing “H1” by “H0” at the end of the reference. All dimensions are mm. Other sizes and modules available upon request. 2D/3D Drawings available upon request (1) : M = Module / (2) : Z = Number of teeth / (3) : H = Number of holes / (4) : CPE = Cumulative Pitch Error on 300mm
Open the catalog to page 16All RECKON DRIVES INTERNATIONAL S.A.S. catalogs and technical brochures
RACKS CATALOG16 Pages
LOW BACKLASH PLANETARY GEARBOXES290 Pages
racks and pinions16 Pages
Catalogue Reckon 2017144 Pages
- Planetary gearbox
- Coaxial gearhead
- Precision gearhead
- Right angle gearhead
- Gear train gear reducer
- Shaft gearhead
- Helical gear gearhead
- Machines gearbox
- High-performance gearhead
- Low-backlash gearhead
- Clamp gearbox
- High-precision gearhead
- Electric motor gearhead
- Flange-mounted gearhead
- Helical gear rack
- Straight-toothed rack and pinion
- Cutting machine gear reducer
- Ground rack and pinion