Speed & Distance 200

Product catalog summary

Overview: The RDS Speed & Distance 200 is a cost-effective and user-friendly instrument designed to monitor speed and distance, with an integrated overspeed alarm to enhance vehicle safety by ensuring compliance with site speed restrictions.

Specifications: The device operates on a voltage range of 10 - 30 Vdc and functions within a temperature range of -20 to +40°C. It is environmentally protected with an IP67 rating, ensuring it is sealed against water and weather conditions. The unit also offers full RFI/EMI protection.

Features and Advantages:

Internal and external alarms activate if the pre-set speed limit is exceeded, which can also trigger vehicle retardation through a fuel-restricting solenoid valve.
The device logs distance traveled at overspeed in four bands, with access protected by a 4-digit PIN.
It provides accurate speed and distance measurements, with a resolution of 0.001 miles or km, and can operate in both metric and imperial modes.
The large backlit LCD enhances visibility, and the unit's robust design minimizes downtime for servicing or repair.
Installation is versatile, with options for free-standing or panel-mounted setups, supported by a unique bracket for flexible positioning.

System Enhancements: The system can be enhanced with Satspeed for a non-contact GPS speed signal interface and the RDS GPS 16 receiver for precise GPS speed and distance measurement.

Additional Products: The range also includes Liftalert for forklift load monitoring and Liftlog 100 for weighing systems with early warning of tip-over points.

Contact Information: RDS Technology Ltd, Cirencester Road, Minchinhampton, Stroud, Glos GL6 9BH, UK. Phone: +44 (0)1453 733300, Email: [email protected], Website: www.rdstec.com

Catalog excerpts

A speed and distance monitoring instrument with overspeed alarm The Speed & Distance 200 from RDS is a cost effective, user-friendly speed and distance measuring instrument that alarms when the vehicle travels in excess of site speed restrictions increasing vehicle safety.

Open the catalog to page 1

The input signal is taken from a magnetic sensor, normally on the nondriven (i.e. front wheel) or transmission shaft. An override switch enables the travelling distance to be excluded automatically from the distance total. Distance travelled at overspeed is logged in the following bands: Band 1: Set limit to +5% Band 2: Set limit to +5% to +20% Band 3: Set limit to +20% to +50% Band 4: Set limit to +50% and over. The instrument can be operated in metric or imperial mode and access to the overspeed log is protected by a 4-digit PIN. TECHNICAL DETAILS Operating voltage: 10 - 30 Vdc Temperature...

Open the catalog to page 2

Speed & Distance 200

Speed & Distance 200

Catalog excerpts

All RDS Technology Ltd. catalogs and technical brochures