DISPLACEMENT PY Extreme Environment Non-Contact Displacement Transducer ● ● ● ● ● ● Non-contact High radiation resistance High temperature survival Submersible Stainless steel Infinite resolution The PY non-contact displacement transducer measures the distance between its front face and a target made from a ferritic material. A ferritic material is one which is attracted by a magnet. This sensor is appropriate for high temperature, high pressure and high nuclear radiation position measurement applications. Many applications in turbines, in nuclear power stations and in research labs are appropriate for this sensor. There are two types of PY transducer, a single coil version (which must be used in pairs) and a double coil version which can be used alone. As the output of the PY is not linear, linearisation may be necessary depending on the application. Our 615 amplifier is designed for this. The single coil displacement transducer version must be used in pairs for example one on each side of a rotation shaft. Single coil version. Maximum measurement gap Typical target Maximum radiation dose

The double coil transducer version can be used to measure the gap between a single PY and a suitable target. Double coil version. Maximum measurement gap Typical target Specification Temperature coefficient (combined zero and span) Electrical termination Maximum static pressure ±0.03% F.S. /°F (typical) 6.6ft (integral cable) Longer available to order. 2901psi (212°F maximum) Due to our policy of on-going development, specifications may change without notice. Any modification may affect some or all of the specifications for our equipment. All dimensions and specifications are nominal. RDP Electrosense...