Catalog excerpts
ELECTRONICS E308/9 Analogue Amplifier With Digital Display / Panel Meter Compatible with Most full bridge strain gauge transducers Most amplified transducers from any manufacturer Compatible with Any standard RDP LVDT (without integral electronics). Most LVDTs from any manufacturer. LVDT amplifier Strain gauge transducer amplifier Digital display module Voltage / 4-20mA output Limit trips Simple trimpot controls Signal conditioning is required where the output of a transducer needs to be boosted or changed into a form suitable for the monitor or logging device which will be used. Our digital display units have a built-in monitor device in the form of the digital display as well as analogue output. Both E308 and E309 have high and low limits with voltage-free relay outputs. The E308 has a shunt calibration facility to enable calibration checks to be made. A very wide range of gain adjustment ensures that our amplifiers are compatible with the vast majority of LVDT and strain gauge sensors available from any manufacturer. Although they have a digital display, these units are entirely analogue and are configured using switches and potentiometers, there is no set-up software to learn.
Open the catalog to page 1
Specification Type Ac supply version Compatible with Number of digits Display update rate Transducer excitation Signal input range Output details Electrical output bandwidth Input impedance Linearity error Output ripple (peak-topeak) Temperature coefficient (zero) Temperature coefficient (span) Number of channels Limit trips Operation time Contact rating Operating temperature range Total weight E308 240Vac/120Vac (+5/-20%), 50/60Hz 10VA Most full bridge strain gauge transducers Most amplified transducers from any manufacturer 4 ½, red LED (0.43'') 2.5Hz E309 240Vac/120Vac (+10/-20%),...
Open the catalog to page 2All RDP Electronics catalogs and technical brochures
-
Model RLT Tension Load Cell2 Pages
