CAPACITOR AND RESISTOR/CAPACITOR NETWORKS RESISTORS^ CAPACITORS^ COILS^ DELAY LINES RC SERIES □ Widest selection in the industry! □ Low cost resulting from automated production □ PCB space savings over discrete components □ Custom circuits available □ Exclusive SWIFTTM delivery available (refer to DSN series) □ Options include voltage ratings to 2KV, multiple values, custom marking, low profile & narrow profile designs, diodes, etc. • RC1001 250G101K TiTTmi li li Ini 11 )i STANDARD SCHEMATICS (Custom circuits available) SPECIFICATIONS RESISTORS Resistance Range: 22Q to 1MQ standard, 1Q to 100M avail. Tolerance: ±5% standard, ±2% and ±1% available Temp. Coefficient: ±100ppm typ (±250ppm <50Q & >2.2M) Voltage rating: 50V (up to 1KV available) Operating Temp: -55° C to +125°C Power Rating: .2W @25°C (package power = .125W/pin) CAPACITORS Capacitance Range: 10pF to 0.1pF standard, 0.5pF to 10pF avail. Voltage rating: 50V standard, 6.3V to 2KV available Dielectric: COG(NPO), X7R, X5R, Y5V, Z5U* Standard capacitance values & dielectrics: refer to table below (most popular models listed in bold). Any combination of chips from RCD’s CE Series can be utilized on a custom basis. Number of Pins (4 -14 std, 2 -20 avail) Configuration Number — Options: assigned by RCD, leave blank if std Resis.Code (Q) 2 signif. figures & multiplier, - Resistor Tol. Code: J=5% (standard), G=2% Capac. value (pF) 2 signif. figures & multiplier, - Cap. Voltage (if other than std 50V): 006=6.3V, 010=10V, 016=16V, 025=25V, 101=100V, 201=200V, 501=500V, 102=1KV, 202=2KV. Cap. Dielectric: G=COG(NPO), R=X7R, X=X5R, U=Z5U, V=Y5V Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable) * Y5V is standard, Z5U is available (Y5V & Z5U are considered interchangeable) RCD Components Inc, 520 E. Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email: [email protected] FA100 Sale of this product is in accordance with GF-061. Specifications subject to change without notice.