EPOXY COATED INDUCTORS AL SERIES B □ Low cost, delivery typically from stock □ Wide selection (0.1uH to 10,000uH) □ Premium grade materials enable high current, SRF, Q, and temperature ratings □ Numerous design options available: non-std values, increased SRF, Q, current, etc. 1 Lead length applies to loose units (for taped parts refer to T&R Temp Range (incl self heating) * Up to 10,000uH available on AL05 size **Current rating is based on ambient temp of 90°C or less (body temp typically increases 20°C and inductance drops approx 10% at rated current) OPTIONS □ Improved Q & SRF levels □ Increased current & temp ratings □ Cut and formed leadwires □ Non-magnetic construction (opt.Y) □ Inductance testing at 1KHz (opt.55) MARKING Units are color banded with inductance value and tolerance (except AL02 which is typically not marked with tolerance band). Options: Y, 55 (leave blank if std) Inductance(uH): 2digits & multiplier (R10=0.1uH,1R0=1uH, 100=10uH)-l Tolerance Code: K=10% (standard), M=20%, J=5% Packaging: B=Bulk, T=T&R, A=Ammo (AL02 only avail. as Ammo or cut Ammo (B) Termination: W = Lead-free, Q = Tin/Lead (leave blank if either is acceptable) RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel:603-669-0054 Fax:603-669-5455 [email protected] FA034B Sale of this product is in accordance with GF-061. Specifications subject to change without notice.