Needles, pins, cylindrical rollers and shafts

1 / 2 PagesView full catalog

Needles, pins, cylindrical rollers and shafts

Product catalog summary

Cylindrical Steel Shafts

Material: AISI 52100 (DIN 1.3505), hardened to 60 HRC.
Dimensions: Diameters range from 0.20 to 10 mm; lengths from 6 mm to 80 mm.
Tolerances: Diameter tolerances of +/- 0.002 mm along the entire length.
Finish: Centreless ground, lapped, and polished.
Applications: Used in general mechanics, guides, and shafts for micro-motors.

Hardened Stainless Steel Pins

Material: Stainless steel X40 Cr 13 (DIN 1.4034), hardness to 55 HRC.
Dimensions: Diameters from 0.50 to 10 mm; lengths up to 80 mm.
Tolerances: Diameter tolerances of +/- 0.002 mm.
Finish: Centreless ground, lapped, and polished with Ra = 0.05 - 0.10.
Applications: Suitable for general mechanics, repairs, gauges, stamping tools, guides, and rollers.

Measuring Pins

Material: AISI 52100 (DIN 1.3505), hardness to 62 - 64 HRC.
Dimensions: Diameters in steps of 0.01 mm from 0.50 to 10 mm; lengths up to 90 mm.
Tolerances: Diameter tolerances of +/- 0.002 mm; length tolerances of +/- 0.1 mm.
Finish: Centreless ground, lapped, and polished with 2 flat ends, Ra 0.1 on diameter.

Specialities

Micromotor pins, rolling pins, needle size pins, milled pins, cylindrical steel pins, measuring pins.
0.001 mm diameter selection of rolling pins and needle size pins.
Length milled with 0.02 mm precision.
Production available in large, medium, and small batches.

Catalog excerpts

Needles, pins, cylindrical rollers and shafts-1

CYLINDRICAL STEEL SHAFTS Diameter tolerances +/- 0.002 mm along the entire length Centreless ground, lapped and polished HARDENED STAINLESS STEEL PINS Stainless steel X40 Cr 13 (DIN 1.4034) Hardness to 55 HRC Diameter tolerances Centreless ground, lapped and polished Ra = 0.05 - 0.10 General mechanics and repairs, gauges,stamping tools, guides, rollers for various uses. RBC France SAS 19 avenue de Norvège Z.A. de Courtaboeuf 1 FR-91953 Les Ulis cedex

Open the catalog to page 1

Needles, pins, cylindrical rollers and shafts-2

MEASURING PINS Diameter tolerances Length tolerances Centreless ground, lapped and polished, 2 flat ends, Ra 0.1 on diameter SPECIALITIES • Micromotor pins • Rolling pins of equal or smaller length than diameter • Needle size pins • Milled pins • Cylindrical steel pins • Measuring pins • Large, medium and small batches production • Various other pins • Length milled with 0,02 mm precision • 0,001 mm diameter selection of rolling pins and needle size pins RBC France SAS 19 avenue de Norvège Z.A. de Courtaboeuf 1 FR-91953 Les Ulis cedex

Open the catalog to page 2

Needles, pins, cylindrical rollers and shafts

Needles, pins, cylindrical rollers and shafts

Catalog excerpts

All RBC France catalogs and technical brochures