AIRFRAME CONTROL BALL BEARINGS — AW-AK SERIES RADIAL, STAINLESS STEEL MS27649 • SAE-AS7949 • Single row, ball, deep groove • Rings and balls are made of CRES 440C (not cadmium plated) • PTFE seals and CRES sealcaps • Prelubricated for life • Bores and outside diameters of this series are the same as for corresponding sizes of the KP-A Series on page 28, but rings are wider for retainers and seals, and offsets between inner and outer ring faces are greater, providing increased bracket clearance at mounting AIRFRAME CONTROL BALL BEARINGS SPECIFICATIONS AND ORDERING INFORMATION TO ORDER, SPECIFY BEARING NUMBER AND FACTORY SPECIFICATION. SEE TABLE 1 ON PG 8. (Example AW3AK FS464) Bearing Number Thrust Limit Load Rating Radial Limit Load Rating lbf. in production. Will be produced as requirements justify tooling. ©2008 RBC Bearings Incorporated. All rights reserved. For more information visit our web site at rbcbearings.com