AIRFRAME CONTROL BALL BEARINGS — MKP-BS PRECISION SERIES SELF-ALIGNING MKP-BS Precision Series AIRFRAME CONTROL BALL BEARINGS • Single row, ball, externally self-aligning, extra light duty • PTFE seals and CRES sealcaps • Exposed surfaces except bore, caps, and seals are cadmium plated • Prelubricated for life • This series is internally identical to the MKP-B series. Self-alignment is provided by an external self-aligning ring whose internal spherical-ground surface is accurately matched to the external spherical-ground surface of the outer ring. These bearings are designed to compensate for initial misalignment • Also offered with CRES 440C material and/or zinc nickel plating per OEM specifications C x 45° SPECIFICATIONS AND ORDERING INFORMATION TO ORDER, SPECIFY BEARING NUMBER AND FACTORY SPECIFICATION. SEE TABLE 1 ON PG 8. (Example MKP16BS FS464) Bearing Number 52100† M Misalignment Either Direction (Ref.) Wt. Radial Limit Load Rating Thrust Limit Load Rating For CRES 440C material prefix “A” in part number; e.g., AMKP16BS ©2008 RBC Bearings Incorporated. All rights reserved. For more information visit our web site at rbcbearings.com