Roller Lubricators and Sector Lubrication Systems tion Syste ica m s br u Quality from the Market Leader L u b ric a n ts

Roller Lubricators and Sector Lubrication Systems Roller Lubricators and Sector Lubrication Systems

Roller Lubricators and Sector Lubrication Systems Table of Contents Page Roller Lubricators Sector Lubrication Systems Calender Lubrication System Felt/Brush Rollers Spare Felts/Spare Brushes Dosing Control Units Telescopic Extension Units

Roller Lubricators and Sector Lubrication Systems Selection of roller lubricators RB M Roller Ø [mm] Lubrication widths [mm] WA upper roller WA lower roller Stamping Fine blanking Deep drawing Cold rolling Coil slitting Roll forming Blank Coil Mach. number of strokes*3 max. speed Dosing controller MST-XX(D) Dosing controller EST-XXD Manual lift control HST WA = Roller positioning Sp = Adjusting spindle x = well suited Fe = Spring S = Material thickness o = conditionally suitable Pn = Pneumatic cylinder VL = Feed length -- = not suitable (or no marking) The information is based on the experience...

Roller Lubricators and Sector Lubrication Systems and accessories RB FK-P-SW / RB BK-P-SW Fast = high-speed blanking presses *1 = greater material thickness (3-5 mm) requires a vis = medium to highly viscous good coil guidance *2 = up to 5 mm in case of rollers positioned one on top of the other; in case of individual assembly, greater material thicknesses are also possible *3 = strokes/min

Roller Lubricators and Sector Lubrication Systems RB M Description • Oil coating mist-free owing to low wear felt rollers lubricated from inside • The positioning of the upper roller at the coil is realised by means of tension springs Technical data • • • • • • Roller diameter 32 mm Max. material thickness 1.0 mm Max. oil viscosity (40°C) 100 mm²/s Lubrication width 15 to 300 mm The oil must not become resinous and must not contain solid matter With oil connection hoses and visual feed control (drip chambers) Use • Stamping, bending • With limitation: fine blanking, deep-drawing and roll forming...

Roller Lubricators and Sector Lubrication Systems (Roller Lubricator Mini) Width of lower part [mm] Width of upper part [mm]

Roller Lubricators and Sector Lubrication Systems RB MS basic frame Description • The basic frame consists of a base plate with 4 guide pillars and springs • The roller sets (not contained in the scope of delivery of the part) are fixed in a spring-mounted manner on guides in the housing • Due to the contact of the low-wear felt or Cellpor rollers with the coils, the forming lubricant is applied wit hout formation of oil mist • The lubrication procedure takes place from the inside out, by means of fixed hollow axles • By unscrewing the four screws, the lubrication rollers can be exchanged without...

Roller Lubricators and Sector Lubrication Systems (Roller Lubricator Mini Screw Basic Frame) Base plate width Lubrication width

Roller Lubricators and Sector Lubrication Systems Oil coating mist-free owing to lowwear, inside-lubricated felt rollers The positioning of the upper roller at the material is realised by means of pneumatic cylinders, The roller sets are fixed in a spring- mounted manner on guides Roller changing without tools Technical data • • • • • • • Roller diameter 32 mm Max. material thickness 1.0 mm Max. oil viscosity (40°C) 100 mm²/s Lubrication width 50 to 400 mm The oil must not become resinous and must not contain solid matter With oil connection hoses and visual feed control (drip chambers) With...

Roller Lubricators and Sector Lubrication Systems (Roller Lubricator Mini - Quick Change Device) Base plate width [mm]

Roller Lubricators and Sector Lubrication Systems Oil coating mist-free owing to lowwear, inside-lubricated felt rollers The positioning of the rollers is realised by means of tension springs Technical data • • • • • • • • Roller diameter 60 mm Max. material thickness 1.5 mm Max. oil viscosity (40°C) 150 mm²/s Lubrication width 75 to 450 mm The oil must not become resinous and must not contain solid matter With oil connection hoses and visual feed control (drip chambers) Up to a lubrication width of 225 mm, with one-side oil connection From a lubrication width of 300 mm, with oil connection on...

Roller Lubricators and Sector Lubrication Systems (Roller Lubricator Felt) B Width of lower part [mm] Width of upper part [mm]

Roller Lubricators and Sector Lubrication Systems Oil coating mist-free owing to lowwear, inside-lubricated brush rollers The positioning of the rollers is reali sed by means of threaded spindles Technical data • • • • • • • Roller diameter 60 mm Max. material thickness 1.5 mm Max. oil viscosity (40°C) from medium to high viscosity Lubrication width 55 to 430 mm The oil must not become resinous and must not contain solid matter With oil connection hoses and visual feed control (drip chambers) From a lubrication width of 300 mm, with oil connection on both sides Use • Stamping, bending, deep-drawing,...

Roller Lubricators and Sector Lubrication Systems (Roller Lubricator Brush) B Width of lower part [mm] Width of upper part [mm]

Roller Lubricators and Sector Lubrication Systems RB F-SW Description • Oil coating mist-free owing to low wear, inside-lubricated felt rollers • The positioning of the rollers is realised by means of pneumatic cylinders Technical data • • • • • • • Roller diameter 60 mm Max. material thickness 1.5 mm Max. oil viscosity (40°C) 150 mm²/s Lubrication width 100 to 600 mm The oil must not become resinous and must not contain solid matter With oil connection hoses and visual feed control (drip chambers) From a lubrication width of 300 mm, with oil connection on both sides • Felt roller quick-change...