*mydirectindustry

RFY1230B-AWH-LNN

Product catalog summary

General Specifications
The RFY1230B-AWH-LNN is a 12.3-inch TFT LCD module with a resolution of 1920 RGB (H) x 720 (V) pixels. The module dimensions are 308.1(H) x 130.0(V) x 7.6 mm, and it features an active area of 292.032(H) x 109.512(V) mm. The pixel pitch is 0.1521(H) x 0.1521(V) mm. It is a normally black, transmissive LCD type with an 85-degree viewing angle in all directions. The backlight is LED, normally white, and the surface is anti-glare. The module does not include a touch panel and uses a 2-channel LVDS interface.

Interface
The module uses an FPC connector for the electronic interface, specifically the AORORA F31L-1A7H1-21050, which is a 50-pin connector. Key pins include power ground (GND), digital power (VCC), and various LVDS differential clock inputs for odd and even pixels. Additional pins are designated for global reset, standby mode, and LED power connections.

Contour Drawing
The contour drawing provides detailed dimensions and tolerances for the module, with a non-specified tolerance of ±0.3 mm. The bezel opening dimensions are specified, and the drawing includes a scale of 60/1.

Absolute Maximum Ratings
The operating and storage temperature range for the module is -30 to +85°C. The supply voltage (VCC) ranges from 3 to 3.6 V, with a maximum power supply current of 400 mA.

Electrical Characteristics
The differential input high and low thresholds for the LVDS receiver are specified, along with input current and voltage parameters. The backlight unit operates with an LED current of 240 mA and a voltage range of 35.2 to 37.4 volts, with an LED lifetime of 30,000 hours at 25°C.

Catalog excerpts

E-mail: [email protected]

Open the catalog to page 1

General Specifications Size: 12.3 inch Pixel Number: 1920 RGB (H) x 720(V) pixel Module dimension: 308.1(H) x 130.0(V) x7.6 mm Active Area: 292.032(H) x 109.512(V) mm Pixel Pitch: 0.1521(H) x 0.1521 (V) mm LCD type: TFT, Normally Black, Transmissive Viewing Angle: 85/85/85/85 Backlight Type: LED ,Normally White Touch Panel: Without Touch Panel TFT Interface: 2ch-LVDS Surface: Anti-Glare *Color tone slight changed by temperature and driving voltage. Page 2 , Total 7 Pages

Open the catalog to page 2

Interface 1. TFT LCD MODULE FPC connector is used for electronics interface. AORORA F31L-1A7H1-21050 , 50PIN Pin no. Power Ground Digital Power Digital Power Power Ground Power Ground Power Ground Odd pixel negative LVDS differential clock input Odd pixel positive LVDS differential clock input Odd pixel negative LVDS differential clock input Odd pixel positive LVDS differential clock input Odd pixel negative LVDS differential clock input Odd pixel positive LVDS differential clock input ORXCLKIN- Odd pixel negative LVDS differential clock input ORXCLKIN+ Odd pixel positive LVDS differential clock...

Open the catalog to page 3

Power Ground Global reset pin, active low. Standby mode, active low. Cascade signal pin. Abnormal signal detection indicator. Combine HV/DE/Clock/STV/UVP detection result. No connector(Serial interface clock input.SCL) No connector(Serial interface data input/output.CDA) No connector(Serial interface chip enable.CSB) Power Ground Power Ground Thermistor input Thermistor Feedback Note: NTC Parts: Murata NCP18XH103F03RB Page 4 , Total 7 Pages

Open the catalog to page 4

Contour Drawing 308.10±0.5 294.80±0.3 (Bezel Opening) 292.032 (AA) 7.6±0.3 The non-specified tolerance of dimension is ±0.3 mm . 0.24 0.08 0.24

Open the catalog to page 5

Page 6 , Total 7 Pages

Open the catalog to page 6

Page 7 , Total 7 Pages

Open the catalog to page 7

All Raystar Optronics, Inc. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list