RFM1210E-AWW-LNN
6Pages

E-mail: sales@raystar-optronics.com

General Specifications ■ Size: 12.1 inch ■ Pixel Number: 1024 x R.G.B. x 768 pixel ■ Module dimension: 260.5 x 204.0 x 8.4 mm ■ Bezel Opening Area: 249.0 x 187.5 mm ■ Active Area: 245.76 (H) x 184.32 (V) mm ■ Pixel Pitch: 0.240(H) x 0.240(V) mm ■ LCD type: TFT, Normally black, Transmissive ■ View Direction: Wide View ■ Aspect Ratio: 4:3 ■ TFT Driver IC: TBD ■ TFT Interface: 1ch-LVDS Backlight Type: LED ,Normally White Touch Panel: Without Touch Panel Surface: Anti-Glare *Color tone slight changed by temperature and driving voltage. Page 2 , Total 6 Pages

Interface 1. TFT LCD MODULE Pin Name Differential Data Input, CH3 ( Positive ) Differential Data Input, CH3 (Negative ) NC LVDS 6/8 bit select function control, Low or NC  6 bit Input Mode High  8bit Input Mode Differential Clock Input ( Positive ) Differential Clock Input ( Negative ) Differential Data Input , CH2 ( Positive ) Differential Data Input , CH2 ( Negative ) Differential Data Input , CH1 ( Positive ) Differential Data Input, CH1 ( Negative ) Differential Data Input, CH0 ( Positive ) Differential Data Input, CH0 (Negative ) Horizontal Reverse Scan Control, Low or NC  Normal...

Contour Drawing DATA COF POSITION (SI MECHANICAL STRUCTURE SHOULD NOT TOUCH THE POSITION OF DATA COF) DATA COF POSITION (SI MECHANICAL STRUCTURE SHOULD NOT TOUCH THE POSITION OF DATA COF) 4-M2 USER HOLE Max.TORQUE: 2.0Kg-cm Max.Depth: 2.7mm SECTION XX-XX SCALE 5/1 The non-specified tolerance of dimension is ±0.5 mm . Page 4 , Total 6 Pages

The non-specified tolerance of dimension is ±0.5 mm . Page 5 , Total 6 Pages

Absolute Maximum Ratings Item Operating Temperature Storage Temperature Electrical Characteristics TFT LCD Module Ta = 25 ± 2 ºC Parameter LVDS differential input voltage LVDS common input voltage Power Supply Voltage Rush Current Power Supply Current White Black Power Consumption