RAYSTAR Web: www.raystar-optronics.com E-mail: [email protected] RFJ240K-ALW-DNN SPECIFICATION Size: 2.4” inch Dot Matrix: 240 x RGB x 320(TFT) dots Module dimension: 42.72(W) x 60.26(H) x 2. Active area: 36.72 x 48.96 mm ■ Dot pitch: 0.153 x 0.153 mm ■ LCD type: TFT, Normally White, Transmissive ■ View Direction: 6 o’clock ■ Gray Scale Inversion Direction: 12 o’clock ■ Interface: SPI ■ Aspect Ratio: Portrait ■ Backlight Type: LED, Normally White ■ Touch Panel: Without Touch Panel ■ Surface: Glare *Color tone slight changed by temperature and driving voltage. Page 1 , Total 4 Pages

Ground Serial data output pin (SDO) in serial bus system interface II. If not used, please open this pin. Tearing effect output. If not used, please open this pin serial interface I / serial interface II System reset pin. Serial data input pin and output pin(SDA) in serial bus system interface I. Serial data input pin (SDI) in serial bus system interface II. The data is inputted on the rising edge of the SCL signal. If not used, please let it open or connected to VSSD. (NWR) Write enable pin I80 parallel bus system interface. (SCL) server as serial data clock in serial bus system interface when...

cified tolerance of dimension is ±0.3 mm Page 3 , Total 4 Pages

Absolute Maximum Ratings Item Operating Temperature Storage Temperature Electrical Characteristics 1. Operating conditions Item Supply Voltage For Analog 2. LED driving conditions Parameter Power Consumption