RFH700A8-AYW-MNN
6Pages

Page 1 , Total 6 Pages

曜凌光電股份有限公司 Raystar Optronics, Inc. T: +886-4-2565-0761 sales@raystar-optronics.com sales@raystar www.raystar-optronics.com optronics.com RFH700A8-AYW-MNN RFH700A8 SPECIFICATION General Specification Size: 7.0 inch Dot Matrix: 1024 × RGB × 600(TFT) dots Module dimension: 169.9(W) × 103.4(H) × 5.6(D) mm Active area: 154.2144 × 85.92 mm Pixel pitch: 0.1506 × 0.1432 mm LCD type: TFT, Normally Black, Transmissive Viewing Angle: 85/85/85/85 Aspect Ratio: 16:9 Driver IC: EK79007AD3 + EK73217BCGA or equivalent Interface: 4-Lanes MIPI Backlight Type: LED, Normally White Touch Panel: Without Touch...

Power for Analog Circuit MIPI data input. MIPI data input. MIPI data input. MIPI data input. MIPI clock input MIPI clock input MIPI data input. MIPI data input.

MIPI data input. MIPI data input. Standby mode. STBYB = ”H“,normal operation(default) STBYB STBYB = ”L”, timing controller, source driver will turn off, all output are GND. RESET Global reset pin. Active Low to enter Reset State. Normally pull high. Connecting with an RC reset circuit for stability. VDD(1.8V) Digital circuit VCOMIN Common voltage Note When L/R=”0”,set right to left scan direction. When L/R=”1”,set left to right scan direction. When U/D=”0”,set top to bottom scan direction. When U/D=”1”,set bottom to top scan direction.

VLED+ VLED+ VGH VGL UPDN SHLR VLEDVLEDAVDD GND D3P D3N GND D2P D2N GND CLKP CLKN GND D1P D1N GND D0P D0N GND STBYB RESET VDD (1.8V) VDD (1.8V) Pull tape Contact side Black tape Component Area Bending area The non-specified tolerance of dimension is

Absolute Maximum Ratings Item Operating Temperature Storage Temperature Electrical Characteristics 1.Typical Operation Conditions Item Power voltage Analog Power Current for Driver Power Current 2. Backlight Driving Conditions Item