RFH1010J-AYH-MNB
6Pages

Page 1 , Total 6 Pages

曜凌光電股份有限公司 Raystar Optronics, Inc. T: +886-4-2565-0761 sales@raystar-optronics.com sales@raystar www.raystar-optronics.com optronics.com RFH1010J-AYH-MNB RFH1010J SPECIFICATION General Specifications Size: 10.1 inch Dot Matrix: 1024 RGB × 600 dots Module dimension: 235(W) × 143(H) × 8.78(D) mm Active area: 222.72 (H) × 125.28(V) mm Pixel pitch: 0.2175(W) × 0.2088(H) mm LCD type: TFT, Normally Black, Transmissive TFT Interface: 4-Lanes MIPI Lanes Driver IC: EK79007AD3 + EK73217BCGA or equivalent Viewing Angle: 85/85/85/85 Aspect Ratio: 16:9 Backlight Type: LED, Normally White PCAP IC:...

Analog power Digital ground MIPI data input. MIPI data input. Digital ground MIPI data input. MIPI data input. Digital ground MIPI clock input MIPI clock input Digital ground MIPI data input. MIPI data input. Digital ground MIPI data input. MIPI data input. Digital ground

STBYB = ”H“,normal operation(default) STBYB = ”L”, timing controller, source driver will turn off, all output are GND. Global reset pin. Active Low to enter Reset State. Normally pull high. Connecting with an RC reset circuit for stability. Digital power Digital power Common voltage System ground I2C data input and output External Reset, Low is active External interrupt to the host System ground Power supply Power supply Note: Interface can support both USB and I2C,USB is main function Note 2 : Connect VSS(USB_VSS) of CTP wtih TFT GND

Pull Tape Black tape Component area Contact side Steel stiffener+DST Contact side Component Area Black printing Bending Area Bending Area VLED+ VLED+ VGH VGL UPDN SHLR VLEDVLEDAVDD GND D3P D3N GND D2P D2N GND CLKP CLKN GND D1P D1N GND D0P D0N GND STBYB RESET VDD (1.8V) VDD (1.8V) VCOMI The non-specified tolerance of dimension is ±0.3 mm .

Absolute Maximum Ratings Item Operating Temperature Storage Temperature Electrical Characteristics 1. Typical Operation Conditions (At Ta = 25 °C,) Item Gate On Power Supply Voltage Gate Off Power Supply Voltage Common Power Supply Voltage Digital Power Supply Voltage For LCD Analog Power Supply Voltage IVDDT Supply PCAP USB_VDD 5V