E-mail: [email protected]

General Specifications Size: 5.0 inch Dot Matrix: 800× 3(RGB) × 480 dots Module dimension: 120.7(W) × 75.8(H) × 2.8mm Active area: 108(W) × 64.8 (H) mm Dot pitch: 0.135(W) × 0.135(H) mm LCD type: TFT, Normally Black, Transmissive View Direction: 80/80/80/80 Aspect Ratio: 16:9 Driver IC: ST7262 or equivalent Interface: 24 bit R.G.B. Backlight Type: LED, Normally White Touch Panel: Without Touch Panel Surface: Anti-Glare *Color tone slight changed by temperature and driving voltage.

Interface LCM PIN Definition FPC Connector is used for the module electronics interface. Pin Power for LED backlight (Cathode) Power for LED backlight (Anode) Power Ground Power voltage Green data(LSB) Green data Green data Green data Green data Green data Green data Green data(MSB) Blue data(LSB) Blue data Blue data Blue data Blue data Blue data Blue data Blue data(MSB) Page 3 , Total 6 Pages

Power Ground Sample clock Display on/off Data input enable Power Ground Page 4 , Total 6 Pages

Black tape component area COMPONENT HEIGHT The non-specified tolerance of dimension is ±0.3 mm .

Absolute Maximum Ratings Item Operating Temperature Storage Temperature Electrical Characteristics Typical Operation Conditions Values Item Power voltage Input logic high voltage Input logic low voltage