1. Catalogs
  2. Raymond
  3. GUIDE STORAGE SPACE EFFICIENCY
video corpo

GUIDE STORAGE SPACE EFFICIENCY

GUIDE STORAGE SPACE EFFICIENCY
1 / 15 PagesView full catalog

GUIDE STORAGE SPACE EFFICIENCY

Product catalog summary
Introduction
This document provides a demonstration of how Raymond trucks can optimize storage space efficiency. It highlights the potential space savings when using different types of Raymond vehicles in various building configurations.

Building Configurations
The document categorizes examples into three building types: existing buildings with 22-foot clear height, spec buildings with 27-foot clear height, and purpose-designed buildings with 40-foot or more clear height. Each section maintains constant building and load specifications, varying only in aisle width and storage levels.

Space Savings with Narrow Aisle
Raymond trucks operate in narrower aisles than conventional forklifts, allowing for increased vertical storage without expanding horizontally. This can lead to up to 80% more storage space.

Truck Types and Specifications
  • Counterbalanced Truck: Requires 12-foot aisles, limited to 4-5 stack levels.
  • Reach-Fork Truck: Operates in 8-foot aisles, can stack up to 5 levels, saving up to 33% floor space.
  • Swing-Reach Truck: Aisles as narrow as 5.5 feet, saving up to 45% floor space.
  • Deep-Reach Truck: Allows double-deep storage, saving up to 48% floor space.
  • Transtacker: Maximizes storage density with 13 levels, saving up to 80% floor space.


Calculating Storage Efficiency
The document provides a formula to calculate the average square footage per pallet stored, allowing users to apply it to their specific situations.

Conclusion
Raymond offers CustomCare™ solutions tailored to individual business needs, aiming to enhance efficiency and productivity. The document emphasizes the importance of choosing the right equipment and configuration to maximize storage space and operational efficiency.
See more

Catalog excerpts

GUIDE STORAGE SPACE EFFICIENCY-2

Saving space is Just The beginning Maximizing the efficiency and productivity of a facility is no simple task. With so many variables constantly changing, getting the most out of your business space is critical for your individualized success. How can you get the most out of each square foot? How can you streamline operations from the ground up? How can labor costs fall while developing better product protection? Discover the Narrow Aisle. Raymond trucks can operate in aisles that are less than half the width required by conventional forklift trucks, and boast a greater stack height capability....

 Open the catalog to page 2
GUIDE STORAGE SPACE EFFICIENCY-3

EXISTING BUILDING the grey space represents the area required to store 1,000 pallets using: COUNTERBALANCED TRUCK The typical counterbalanced truck requires an approximate aisle width of 12 feet, with stack height limited to 4 or 5 levels. This results in limited utilization of the cubic space and limited rack faces. AREA REQUIRED: Key specifications: 21’ clear height building 2,500 lb. load requirement 180” top beam 92” beam length 188” lift height 4 levels high 144” aisle

 Open the catalog to page 3
GUIDE STORAGE SPACE EFFICIENCY-4

EXISTING BUILDING the grey space represents the area required to store 1,000 pallets using: RAYMOND REACH-FORK TRUCK The Raymond Reach-Fork Truck requires an aisle of just over 8 feet, reducing the size of the storage area, and reducing travel distances and cycle times. AREA REQUIRED: Key specifications: 21’ clear height building 2,500 lb. load requirement 180” top beam 92” beam length 188” lift height 4 levels high 105” aisle You save approximately 16% of your valuable floor space or store 19% more pallets.

 Open the catalog to page 4
GUIDE STORAGE SPACE EFFICIENCY-5

EXISTING BUILDING the grey space represents the area required to store 1,000 pallets using: RAYMOND SWING-REACH TRUCK The Raymond Swing-Reach Truck works both sides of the aisle by rotating the forks on the mast. Since no right angle stacking turns are required, the aisle can be as narrow as 5.5 feet. AREA REQUIRED: Key specifications: 21’ clear height building 2,500 lb. load requirement 180” top beam 92” beam length 188” lift height 4 levels high 66” aisle You save 32% of your valuable floor space or store 46% more pallets.

 Open the catalog to page 5
GUIDE STORAGE SPACE EFFICIENCY-6

EXISTING BUILDING the grey space represents the area required to store 1,000 pallets using: RAYMOND REACH-FORK TRUCK The Raymond Reach-Fork Truck requires an aisle of just over 8 feet, and can stack 5 levels high without downrating. The counterbalanced truck is not practical going to 5 levels due to significant downrating. AREA REQUIRED: Key specifications: 27’ clear height building 2,500 lb. load requirement 238” top beam 92” beam length 248” lift height 5 levels high 105” aisle You save approximately 33% of your valuable floor space or store 49% more pallets.

 Open the catalog to page 6
GUIDE STORAGE SPACE EFFICIENCY-7

SPEC BUILDING the grey space represents the area required to store 1,000 pallets using: RAYMOND SWING-REACH TRUCK The Raymond Swing-Reach Truck works both sides of the aisle as narrow as 5.5 feet. Unlike the couterbalanced truck, there is no downrating at stack heights of 5 levels. AREA REQUIRED: Key specifications: 27’ clear height building 2,500 lb. load requirement 232” top beam 92” beam length 242” lift height 5 levels high 66” aisle You save more than 45% of your valuable floor space or store 83% more pallets.

 Open the catalog to page 7
GUIDE STORAGE SPACE EFFICIENCY-8

SPEC BUILDING the grey space represents the area required to store 1,000 pallets using: RAYMOND DEEP-REACH TRUCK The Raymond Deep-Reach Truck allows double-deep pallet storage in the racks, eliminating two aisles out of every fie, for increased storage density. Aisle width is just over 8 feet and it allows one more storage level AREA REQUIRED: than a counterbalanced truck. Key specifications: 27’ clear height building 2,500 lb. load requirement 238” top beam 98” beam length ( straddle method) 248” lift height 5 levels high 105” aisle You save more than 48% of your valuable floor space or store...

 Open the catalog to page 8
GUIDE STORAGE SPACE EFFICIENCY-9

PURPOSE DESIGNED BUILDING the grey space represents the area required to store 1,000 pallets using: RAYMOND REACH-FORK TRUCK The Raymond Reach-Fork Truck enables you to take advantage of increased building heights to maximize the utilization of your storage sppace. Key specifications: AREA REQUIRED: 40’ clear height building 2,500 lb. load requirement (with potential downrating) 411” top beam 92” beam length 421” lift height 8 levels high 115” aisle You save approximately 56% of your valuable space to store 127% more pallets.

 Open the catalog to page 9
GUIDE STORAGE SPACE EFFICIENCY-10

PURPOSE DESIGNED BUILDING the grey space represents the area required to store 1,000 pallets using: RAYMOND DEEP-REACH TRUCK The Raymond Deep-Reach Truck allows you to double-deep pallet storange in the racks. Not only can you take advantage of increased storage heights and narrower aisles, the Raymond Deep-Reach Truck lets you eliminate two aisles out of every five. Key specifications: AREA REQUIRED: 40’ clear height building 2,500 lb. load requirement (with potential downrating) 98” beam length (straddle method) 421” lift height 8 levels high 112” aisle You save approximately 67% of your valuable...

 Open the catalog to page 10
GUIDE STORAGE SPACE EFFICIENCY-11

PURPOSE DESIGNED BUILDING the grey space represents the area required to store 1,000 pallets using: RAYMOND SWING-REACH TRUCK The Raymond Swing-Reach Truck works both sides of the aisle by rotating the forks on the mast. Since no right angle stacking turns are required the aisle can be narrow as 5.6 feet. Key specifications: 45’ clear height building AREA REQUIRED: 2,500 lb. load requirement (with downrating above 240” fork elevation) 469” top beam 92” beam length (straddle method) 480” lift height 9 levels high 72” aisle You save approximately 69% of your valuable floor space or store 218% more...

 Open the catalog to page 11
GUIDE STORAGE SPACE EFFICIENCY-12

PURPOSE DESIGNED BUILDING the grey space represents the area required to store 1,000 pallets using: RAYMOND TRANSTACKER The Raymond Transtacker increases stacking height to 13 levels while reducing aisle width to only 56 inches. It allows for maximum storage density and cube utilization. Key specifications: 64’ clear height building AREA REQUIRED: 4,000 lb. load requirement (no downrating) 684” top beam 92” beam length 700” lift height 13 levels high 56” aisle You save approximately 80% of your valuable floor space or store 406% more pallets.

 Open the catalog to page 12

All Raymond catalogs and technical brochures

  1. 4750

    1  Page

  2. EDGE STACKER

    2  Pages

  3. RAYMOND 4750

    1  Page

  4. RAYMOND 4460

    1  Page

  5. iBattery

    2  Pages

  6. Truck Features

    12  Pages

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.