Technical Sheet Sliprings Type PME Evolution Main Performances Housing In aluminium with insulating thermoplastic bands Vertical axis, as illustrated here below Rings wired with 2 m. long cable Cable entry With single-pole wires connected to the rings and through pipe unions M32 to the brush-holders From 20 to 60 rings 20 A - mixed executions 20/50/100 A Armonized rules CEI-EN 60947-1 CEI-EN 60529 2014/35/UE – 2014/30/UE –2006/42/CE Directives Marking Functional Features Nominal voltage Nominal current Protection degree Test voltage Operating temperature Standard Types Type G PME B20 G PME B30 G PME B40 G PME B50 G PME B60 Accessories Availability on demand: • Mixed executions with 100 A, 50 A and 20 A • Absolute Encoder • Types with appropriate rings for signals • Micro-switches application • One passage for air Ravioli S.p.A. Via Passo Pordoi, 4 - 20139 Milan, Italy Tel. +39 02 53.63.01 - Fax +39 02 53.63.05 E-mail: [email protected] - w

The PME Evolution slipring has to be installed only by qualified personnel in compliance with current safety standards. Power to the machine must be turned off before carrying out wiring. Connections are to be made in compliance with the wiring scheme of the controlled equipment. After installation has been completed, the installer is required to check that all commands are working properly. Avoid prolonged contact with oils and acids when using the equipment, as these may Thedamage the products. to be installed only by qualified personnel in A programme of periodical maintenance is required...