RAVENOL Racing Brake Fluid R 325+ Kategorie: Brake fluid Artikelnummer: 1350604 Specification: SAE J 1703, SAE J 1704, übertrifft die Anforderungen an DOT 5.1, übertrifft die Anforderungen FMVSS 116 DOT 4 Application: Passenger car, Motorcycle, Racing Technology: Racing RAVENOL Racing Brake Fluid R325+ is a specially developed high performance braking fluid that has a very high thermal resistance at the very highest DOT 4 level. The formula is based on top class technology with a glycol ether / ester system. The use of a proven additive combination in conjunction with a basis system that is specifically adjusted for the high boiling range to the guarantees safety even under the most extreme loads. RAVENOL Racing Brake Fluid R325+ is an ideal brake fluid for motor sports (car and motorbike racing) due to its very high dry and wet boiling point. The braking system is more responsive even under extreme conditions. Please always observe the vehicle manufacturers specifications. Application Note To achieve optimum results the braking system should be freshly filled with RAVENOL Racing Brake Fluid R325+ before each race. In particular when the brakes are inordinately hot or racing under tropical conditions. Do not mix with other brake fluids! Not suitable for vehicles that require a mineral brake fluid (LHM). Observe manufacturer's specifications. Not recommended if the components used are made of magnesium or are alloys with a high magnesium content. FOLLOW VEHICLE MANUFACTURERS RECOMMENDATIONS WHEN ADDING BRAKE FLUID KEEP BRAKE FLUID CLEAN AND DRY. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs. STORE BRAKE FLUID ONLY IN ITS ORIGINAL CONTAINER. KEEP CONTAINER CLEAN AND TIGHTLY CLOSED TO PREVENT ADSORPTION OF WATER. CAUTION! DO NOT REFILL CONTAINER AND DO NOT USE FOR OTHER LIQUIDS. Dispose of used brake fluid responsibly (EU waste code 160113) Brake fluid damages paint work –if spilt wash off immediately with plenty of water. Characteristics Optimum ABS properties Chemical stability. Highest lubricating powe

Neutral behaviour towards brake parts Low viscosity even at low temperatures Can be mixed with all braking fluids of the same specification.

Technical Product Data PROPERTY Boiling point Hardness Change Rubber Diameter Change Tinned Iron klar, keine Ablagerungen Water content Chemical Stability Cast Iron High Temperature Stabilit

klar, keine Ablagerungen klar, keine Phasentrennung Wet Equilibrium Reflux Boiling Point pH - value All indicated data are approximate values and are subject to the commercial fluctuations. Alle angegebenen Daten sind ca. Werte und unterliegen handelsüblichen Schwankungen. 27.10.2