Rapid Edge trim granulation
2Pages

Rapid Edge trim granulation Rapid 2036 ”KURF” granulator with RFL-30 infeed for in line recycling of extrusion edge trimmings. Easy handling of edge trimmings The Rapid Roll Feed, RFL-30 built on a 200-36 granulator, is the smart solution for taking care of edge trimmings from foil extrusion lines. The system runs completely in-line, the recycled material can be put directly back to the line to produce new valuable foil.   Much effort have been put to make the roll feed unit and the granulator as easy to handle as you possibly can ask for. The hood can be opened and the edge trimmings inserted while the granulator is still running. Exposed roll feed unit RFL-30, easy access for insertion of edge trimmings.   The twin standard grooved rollers are designed to auto­ aticly keep the edge trims stretched. This in comm bination with the frequency controlled roll feed enables the granulator to run automatically with a minimum of downtime. Innovative design of the RFL unit •  Easy access for insertion of edge trimmings at start up. • Frequency controlled roll feed motor. • No loop control required for infeed speed regulation. • Easy to open, clean and service, no tools required. • Fully sound proofed. • Comes in three widths, RFL-300, -450 and -600 mm • Can be built on any granulator from Rapid 200-Series

TECHNICAL INFORMATION – ROLL FEED Roll Feed unit Max infeed opening, mm Motor, frequency control Infeed rate up to Grooved Straight Single Slipping Knurled alt. smooth Split 2- or 3-section Double roll drive Loop control Types of rolls Pressure roller Transmission Sync. to prod. line Model ‘‘KURF‘‘ Rapid Rotor diameter, mm Rotating knives Bed knives Max throughput, up to kg/h Rapid Granulator AB Box 9, 330 10 Bredaryd, Sweden Telefon: +46 (0)370-86500 info@rapidgranulator.se • www.rapidgranulator.com