TRS TRL INFINITY
16Pages

4 RAPHAEL Product brochure TRS/TRL INFINITY Resilient Seated Gate Valve

TRS/TRL INFINITY RESILIENT SEATED GATE VALVES INFINITY The latest in RAPHAEL´s proven range of valves, the INFINITY represents a new generation of resilient seated gate valves [DN40-700]. As well as boasting of the latest technological advances and unique technical features, INFINITY has been 100% designed and manufactured in Europe using high quality materials and the latest manufacturing technologies, to guarantee, to our valuable customers, an extraordinary lifetime, outstanding operability and unique safety features. FUNCTIONS Isolation resilient seated gate valves, with wedge fully...

CHARACTERISTICS Made of high quality materials according to the relevant standards. Clear way and straight bore, so the flow is optimum with minimum head losses. Replaceable packing under pressure thanks to bayonet stuffing nut. Three independant O-rings to guarantee the tightness throughout the stem. Two O-rings above the collar and one below (up to DN300). Patented* three locking tab for bayonet system up to DN300, with clamping ring to avoid self dismantling, leakage and ejection risk. Innovative dust guard made of three O-rings integrated into one single piece that prevent ingress of...

TRS/TRL INFINITY TECHNICAL ADVANTAGES FOR ENAMELED VERSION, THE VALVE INTEGRATES AN EDGE PROTECTION (1) PLACED ALL AROUND BETWEEN THE BODY AND THE BONNET. 4 The technical data and performance may be modified depending on the technical advances.

01: Due to our PATENTED* three locking tab bayonet system, The INFINITY gate valve has no threads, enabling a continuous coating and therefore avoiding corrosion problems. Moreover, it is easy to remove the stuffing nut, with the valve under pressure and fully open, in order to change the O-ring. * List of the countries on request. 04: Stem and collar made in one piece in stainless steel for better resistance to axial load and to withstand higher operating torques. Washers with PTFE coating (1) placed above and under the collar allow to reduce friction torque and protect coating inside the...

OPTIMUM PROTECTION The INFINITY resilient seated gate valve has been designed with even more rounded surfaces and more ergonomic shapes that allow more uniform coating and ensure protection of the highest quality. The epoxy powder used by BELGICAST is approved for use with potable water by the most prestigious institutions worldwide. Our new state-of-the-art coating line installed in BELGICAST, based on an innovative process with fluidized bath and dipping robot, ensures an excellent adhesion, as well as controlled thicknesses and perfect continuity of the coating without porosity....

QUALITY&TESTIN^ L Quality control • 100% of BELGICAST resilient seated gate valves are tested according to standards below, or as per customer requirements. • ISRAELI STANDARD IS61 & IS5452 • EN 12266-1, EN 1074-1, EN 1074-2. Testing pressures • Shell tightness: 25 bar at room temperature. • Seat tightness: 17.6 bar at room temperature. Minimum test duration (in seconds) (*): according to the max working pressure defined, max temperature defined, and fluid group defined, the "CE marking" is not necessary in the present case. _ 7 The technical data and performance may be modified without...

MATERIALS&DIMENSIONSj TRS IF4I / TRLIFSI - DN40/300 - PN10/16 [according to EN 1 074-2 (annex A) and EN1171 (category 3|| Item Materials table for filtered raw water and potable water. Please consult us for others fluids. 1) or NBR, depending on the approval and on the application. 2) GSK blue epowy coating (Ral 5015), or rilsan, or enamel. 3) black epoxy coating. 4) DN40/50 without wedge sliding skates. 5) Stem also available in stainless steel 316L (1.4404). On request : lateral intakes option only for DN80, DN100 and DN150 TRL. 8 _ 4RAPHAEL The technical data and performance may be...

^ATERIALS&DIMENSIONSj TRS (F4) / TRL (F5) - DN40/300 - PN10/16Square cap and handwheel are optional 0Z

MATERIALS & DIMENSIONS TRS (F4) / TRL [F5) - DN350/700 - PN10/16[according to EN 1 074-2 [annex A) and EN1171 [category 3)) Item Materiats table for filtered raw water and potable water. Please consult us for others fluids. 1) or NBR, depending on the approval and on the application. 2) GSK blue epowy coating [Ral 5015), or rilsan. 3) black epoxy coating. 4) Stem also available in stainless steel 316L [1.4404). [mm) [mm) [mm) [mm) for dosing li no. xd iliLr im[iRL) PN10 PN16 PN10 PN16 On request : by-pass option only for DN350 to DN700 TRL and DN600 to DN700 TRS. * Reduced bore of 600 mm....

WATERWORKS MATERIALS & DIMENSIONS TRS (F4) / TRL (F5) - DN350/700 - PN10/16 Square cap and handwheel are optional

Materiats table for raw water and potable water. Please consult us for others fluids. 1) or NBR, depending on the approval and on the application. 2) GSK blue epowy coating [Ral 5015), or rilsan, or enamel. 3) black epoxy coating. 4) DN40/50 without wedge sliding skates. 5) Stem also available in stainless steel 316L [1.4404). The technical data and performance may be modified depending on the technical advances.

^ATERIALS&DIMENSIONSj PN25 - DN40/300 [According to EN1074-2 [annex a) and EN1171 category3)) DN

TRS/TRL INFINITY ACTUATION METHODS & ACCESSORIES RAPHAEL offers a wide variety of actuation methods that will allow to choose the best option for each installation. The actuation can be made manually or by means of an electrical actuator with or without a gearbox. Also, we offer solutions for buried installations. Pneumatically actuated gate valves with a special design are also available for those installations where speed of actuation is a priority. Position Indicator Limit Switch Electric Actuator Pneumatic Actuator Extension Solutions (Telescopic, Compact, Fix Access Pipe ) Flange...

WATERWORKS INSTALLATION AND OPERATION INSTRUCTIONS GOOD TO KNOW BEFORE INSTALLATION Before installation, in addition to the few informations given below, it is important to read the IOM manual. S torage • eave the rubber wedge slightly open: if it is closed completely, the rubber suffers unnecessary compression. L Remove the flange cover just before the installation. • he gate valves should preferably be stored under cover. A long storage under extreme weather conditions T can cause alterations of the coating and seals. A ssembly in pipe • The assembly of the valve in the pipe is...