YOKOTA impulse wrenches are powerful, very accurate and most important, have no kick-back. The YOKOTA system e-wrench has a built-in torque transducer and angle-encoder on the main shaft and is wireless connected to a controller. Each controller can connect with up to 4 independently operating battery system e-wrenches. The YOKOTA battery system e-wrench is the perfect solution for applications where cables or hoses are disruptive, but you still need to have all data checked, controlled and documented. Complete freedom of movement by use of batteries WLAN data connection High speed fastening Acoustic and LED signals for tightening status indication No Kickback Electric (brushless) servo drive freely RPM adjustable Angle monitoring/controlled torque 100% check on tightening abnormalities like cross thread, double hit, etc. Traceability lightening data Type Volt. Battery Drive Bolt RPM Torque Weight Vibration

BATTERY SYSTEM WRENCH S YS T E M C O N F I G U R AT I O N HYBRID TECHNOLOGY Wireless unit WU-1 • Possible to connect 4 tools with the wireless unit • Parameter input with PC-1 or computer • USB: setting data back up and restore, memory read out. • Memory for 10.000 cycles per tool • Tightening results on DS-1 and/or PC-1 • 4 display connections • LAN and RS 232 interface • I/O terminal for input and output signals Display DS-1 • Display shows: tool number, program, torque, OK/NOK, angle, number of pulses, remaining tightenings. Upper row: tool number / program / torque Lower row: tightening angle...