Technical Data Sheet and Layout Overview

This document from RAM ELETTRONICA S.P.A. provides technical specifications and layout details for the VCR cutting machine series as of September 1, 2020.

1. VCR Configurator Specifications

• Maximum Cutting Height (mm): Available options are 300, 400, 800, and 1300 mm.
• Maximum Cutting Width (mm): Varies by model:
  • 1250 mm for VCR Handy
  • 1600 mm for VCR HT S, VCR BS, and VCR S
  • 2300 mm for VCR HT, VCR B, and VCR

2. Machine Layout and Dimensions

• Workstation dimensions include widths of 1820 mm, 2520 mm, and 4900 mm depending on the model.
• Front and top views are provided to illustrate the machine setup and control panel placement.

3. Control Panel and Functional Elements

• Control panel includes buttons and indicators for:
  • Blade protection control
  • Motor current monitoring
  • Setting values and reset functions
  • Start, stop, emergency stop, and restart commands
  • Position indicators (X max, X min, Y max, Y min, Pos. 0, Pos. 90)
  • Speed control for cutting velocity
• Additional functions include zero device activation and motor tachometer monitoring.

4. Models and Variants

• Models include VCR Handy, VCR HT S, VCR BS, VCR S, VCR HT, VCR B, and VCR, each with specific cutting height and width capabilities.

Critical Information and Recommendations

• Ensure selection of the appropriate model based on required cutting height and width.
• Familiarize with control panel functions for safe and efficient operation.
• Observe all safety protocols, especially emergency stop and blade protection mechanisms.