Catalogs >
Rakon >
RSX1612

RSX1612
7Pages

Catalog excerpts

rakon --[--[■Communication Crystal Low profile SMD AT-cut quartz crystal in a ceramic package with a 1.6 x 1.2 mm foot print. -[[[[[-duct description Miniature low profile AT-cut quartz crystal. True SMD style, ceramic package with nickel plated lid, seam welded. The product is supplied on tape and reel. • Automotive • Communications • GPS • Consumer • Feature phone • Low aging • Wide temperature range • Low hysteresis SPECIFICATION REFERENCE Parameter Model description RoHS compliant Reference number Rakon part number Package 2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition over temperature 2.5 Temperature range 2.8 Long term stability Frequency at 25°C ±2°C and specified load capacitance Frequency shift after reflow with 4 hours recovery at 25°C Referenced to frequency reading at 25°C and the specified load capacitance Operating temperature Residual error from the frequency versus temperature 5th order polynominal curve fit. Minimum of 1 frequency reading every 3°C over operating temperature range Gamma vector of all three axes from 30 Hz to 1500 Hz Frequency drift over 1 year at 25°C Unit MHz ppm ppm ppm °C ppm ppb/g ppm

Open the catalog to page 1

ELECTRICAL Parameter Load capacitance (CL) Shunt capacitance (C0) Pullability Drive level Equivalent series resistance (ESR) Insulation resistance (IR) Test Condition Frequency is calibrated at room temperature Value Unit Line Parameter Description Half sine-wave acceleration of 3000g peak amplitude. Duration: 0.3ms, Velocity: 12.3ft/s [MIL-STD-202 Method 213] 1000 hours at 85°C, 85% Relative Humidity. Biased. [MIL-STD-202 Method 106G] 1000 temperature cycles, where each cycle consists of a 25 minute soak time at -45°C followed by a 25 minute soak time at 85°C, with a 60 second...

Open the catalog to page 2

MODEL DRAWING “DATE CODE (SEE TABLE BELOW) NOTE: 1. MARKING INFORMATION IS DETAILED IN THE SPECIFICATION. 2. PIN CONNECTIONS ARE DETAILED IN THE SPECIFICATION. RECOMMENDED PAD LAYOUT - TOP VIEW TITLE: RSX1612 Model (Package W, M & V) RELATED DRAWINGS: TOLERANCES: XX = XX = +0.1 X.XX = ±0.10 X.XXX = ±0.05 X* = Hole = rakon i 2013 Rakon Limited

Open the catalog to page 3