RSX-10 fal °n gfJHCommunication Crystal Low profile SMD AT-cut quartz crystal in a ceramic package with a 2.5 mm x 2.0 mm foot print. -HJH-duct description Miniature low profile AT-cut quartz crystal. True SMD style, ceramic package with nickel plated lid, seam welded. The product is supplied on tape and reel. Applications • Feature phone • GPS Features • Excellent shock and vibration performance • Low aging Specifications 1.0 SPECIFICATION REFERENCE Line Parameter Description 1.4 Rakon part number 2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition 2.2 Calibration tolerance 2.3 Reflow shift over temperature 2.5 Temperature range Frequency at 25°C ±2°C and specified load capacitance Two consecutive reflows as per attached profile after 4 hours recovery at 25°C Referenced to frequency reading at 25°C and the specified load capacitance Operating temperature Peak-to-peak deviation from the frequency versus temperature curve fit 5th order. Minimum of 1 frequency reading every 3°C over operating temperature range Frequency change after reciprocal temperature ramped over the operating range. Frequency measured before and after at 25°C Unit MHz ppm ppm ppm 2.8 Long term stability Frequency drift over 1 year at 25°C 2.9 g sensitivity Gamma vector of all three axes from 30 Hz to 1500 Hz ELECTRICAL Parameter Load capacitance (CL) Shunt capacitance (C0) Drive level Equivalent series resistance (ESR) Insulation resistance (IR) Test Condition Frequency is calibrated at room temperature. Operating specification Operating specification Unit pF pF |jW Q MQ

Line Parameter Description Half sine-wave acceleration of 100g peak amplitude for 11 ms duration, 3 cycles in each plane After 48 hours at 85°C 85% relative humidity non-condensing Exposed at -40°C for 30 minutes then to 85°C for 30 minutes constantly for a period of 5 days 10g RMS 30 Hz to 1500 Hz duration for 6 hours -55 to 105°C 5.1 Washing Able to withstand aqueous washing process 5.2 Reflow Able to withstand reflow process 5.3 Packaging description Tape and Reel. 3000 pcs per reel standard. Refer to drawing for details Description Laser engraved R and frequency...

Drawing Name: RSX-10 Model Drawing MODEL OUTLINE MARKING EXAMPLE FREQ. IN MHz SIDE VIEW CRYSTAL GND CRYSTAL GND RECOMMENDED PAD LAYOUT - TOP VIEW Year Code TITLE: RSX-10 MODEL RELATED DRAWINGS: TOLERANCES: XX = XX = x'xx = ±0.10 x.xxx = x° = Hole = rakon © 2009 Rakon Limited

mmm i i —■— i i —— i '—m—m m—mmmm i ——■ i ——— —— TITLE: 2520 SERIES CRYSTAL TAPE & REEL RELATED DRAWINGS: TOLERANCES: XX = X.X = ±0.2 X.XX = ±0.10 X.XXX = X° = Hole = rakon © 2009 Rakon Limited

NOTE: The product has been tested to withstand the Reflow Profile shown. The Reflow Profile used to solder Rakon RSX/RGX crystals are determined by the solder paste Manufacturer's specification. It is recommended that the Reflow Profile used does not exceed the one shown above. TITLE: RSX/RGX CRYSTAL Pb-FREE REFLOW RELATED DRAWINGS: SCALE: NTS rakon © 2009 Rakon Limited