rakon --[--[■Communication Crystal Low profile SMD AT-cut quartz crystal in a ceramic package with a 2.0 mm x 1.6 mm foot print. -[[[[[-duct description Miniature low profile AT-cut quartz crystal. True SMD style, ceramic package with nickel plated lid, seam welded. The product is supplied on tape and reel. • Automotive • GPS • Communications • Feature phone • Consumer Features • Low aging • Low hysteresis • Wide temperature range Specifications 1.0 SPECIFICATION REFERENCE Line Parameter Description 1.4 Rakon part number 2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition 2.2 Calibration tolerance 2.3 Reflow shift over temperature 2.5 Temperature range perturbations 2.7 Long term stability Frequency at 25°C ±2°C and specified load capacitance Two consecutive reflows as per attached profile after 4 hours recovery at 25°C Referenced to frequency reading at 25°C and the specified load capacitance Operating temperature Peak-to-peak deviation from the frequency versus temperature curve fit 5th order. Minimum of 1 frequency reading every 3°C over operating temperature range Frequency drift over 1 year at 25°C Gamma vector of all three axes from 30 Hz to 1500 Hz at 10 RMS Unit MHz ppm ppm ppm °C ppm ppm ppb/g ELECTRICAL Parameter Load capacitance (CL) Shunt capacitance (C0) Pull ability Drive level Equivalent series resistance (ESR) Insulation resistance (IR) Test Condition Frequency is calibrated at room temperature Operating specification Load and frequency dependant Operating specification Unit pF pF ppm/pF pW n MO

Line Parameter Line Parameter Description Half sine-wave acceleration of 3000g peak amplitude. Duration: 0.3ms, Velocity: 12.3ft/s [MIL-STD-202 M213] 1000 hours at 85°C, 85% Relative Humidity. Biased. [MIL-STD-202 M106G] 1000 temperature cycles, where each cycle consists of a 25 minute soak time at -45°C followed by a 25 minute soak time at 85°C, with a 60 second maximum transition time between temperatures. Air to air transition. [JESD22 METHOD JA-104C] 5g for 20 minutes. 12 cycles in each of 3 orientations. Test from 10-2000 Hz [JESD22-B103-B] -55 to 105°C Description 2 cycle drop it...

MODEL OUTLINE FRONT VIEW CRYSTAL GND CRYSTAL GND RECOMMENDED PAD LAYOUT - TOP VIEW Y - Year Code M - Month Code D - Day Code Code TITLE: RSX-11 MODEL RELATED DRAWINGS: TOLERANCES: XX = X.X = ±0.2 X.XX = ±0.10 X.XXX = ±0.05 X° = Hole = rakon © 2009 Rakon Limited

TITLE: 2016 SERIES CRYSTAL TAPE & REEL RELATED DRAWINGS: TOLERANCES: XX = X.X = ±0.1 X.XX = ±0.05 X.XXX = X° = Hole = rakon © 2009 Rakon Limited

NOTE: The product has been tested to withstand the Reflow Profile shown. The Reflow Profile used to solder Rakon RSX/RGX crystals are determined by the solder paste Manufacturer's specification. It is recommended that the Reflow Profile used does not exceed the one shown above. TITLE: CRYSTAL Pb-FREE REFLOW RELATED DRAWINGS: SCALE: NTS rakon © 2009 Rakon Limited