RPT7050P The Pluto+ RPT7050P encompasses Rakon’s patented Pluto+ ASIC technology and is specifically designed to meet the short and medium term stability requirements of packet network synchronisation for Small Cells. This‘best‐in‐class’oscillator has low jitter to meet network interface requirements (e.g. 10GE) and low phase noise to meet the radio interface requirements of LTE‐A (TS 36.104) and WCDMA (TS 25.104) transceivers. This enables a single device to be used for both functions. Its superb frequency versus temperature and slope performance, together with low power consumption makes the RPT7050P the ideal choice for Small Cell synchronisation requirements. WCDMA LTE Standard Specifications Parameter Maximum rate of change of temperature condition for guaranteed stability specifications In‐service short term frequency stability ppb/day ppb/month ±2% variation Reference to frequency at nominal supply voltage  HCMOS: ±1pF variation,  Clipped sine wave: ±2% variation Reference to frequency at nominal load ±1 ppm/year ±3 ppm/10year Supply voltage, VCC Current C/Sine Current HCMOS

Pluto+ ™ Ultra Stable SMD VC-TCXO | Small Cells rakon synchronising connectivity SSB Phase Noise (Typical value at 25°C) Ami pico 19.20 MHz RPT7050 SSB Phase Noise AnaPico Signal Source Analyzer APPH6000 26.00 MHz RPT7050 SSB Phase Noise AnaPico Signal Source Analyzer APPH6000 RMS Jitter = 300 fs (12 kHz ~ 5 MHz) Frequency (Hz)Model Outline and Recommended Pad Layout Test Circuit 7.0±0.2 SIDE VIEW Do Not Connect / Vref / Ttemp BOTTOM VIEW 6 PIN TEST CIRCUIT: Enable O- Vc (or TCVCXO Do No* Connect for TCXO (Depending on specification) NOTE: Outline unit is mm. Frequency Counter jL, Reference Voltage...