RPT5032N The RPT5032N encompasses Rakon’s patented Pluto+ ASIC technology and is specifically designed to meet the short and medium term stability requirements of packet network synchronisation for Small Cells. This ‘best‐in‐class’ oscillator has low jitter to meet network interface requirements (e.g. 10GE) and low phase noise to meet the radio interface requirements of LTE (TS 36.104) and WCDMA (TS 25.104) transceivers – enabling a single device to be used for both functions. Its superb frequency versus temperature and slope performance, together with low power consumption makes Pluto+ the ideal choice for Small Cell synchronisation requirements. Standard Specifications Parameter Maximum rate of change of temperature condition for guaranteed stability specifications In‐service short term frequency stability ppb/day ppb/month ±2% variation Reference to frequency at nominal supply voltage  HCMOS: ±1pF variation,  Clipped sine wave: ±2% variation Reference to frequency at nominal load ±1ppm/year ±3ppm/10 yeas Supply voltage, VCC Current C/Sine Current HCMOS

Pluto+ ™ Ultra Stable SMD VC-TCXO | Small Cells 19.2 MHz RPT5032 SSB Phase Noise AnaPico Signal Source Analyzer APPH6000 Model Outline and Recommended Pad Layout (4 Pad) RECOMMENDED PAD LAYOUT External Bypass SIDE VIEW BOTTOM VIEW Do Not Connect / Vc GND RF Output Vcc Model Outline and Recommended Pad Layout (6 Pad) 0.2 -1 RECOMMENDED PAD LAYOUT - TOP VIEW I 3.2±0.2 I y— Output to Circuit 4 External AC Coupling PIN CONNECTIONS NOTE: Outline unit is mm. 1 1Do Not Connect / Vc 2 GND 3 1Do Not Connect / Vref / Vtemp 4 RF Output 5 Vcc 6 Enable