RPT5032A The RPT5032A encompasses Rakon's new patented Pluto+ ASIC. Pluto+ advances on the world famous, ‘best‐in‐class’ Pluto ASIC technology by delivering exceptional phase noise and jitter performance, and enhanced frequency versus temperature stability. The single chip oscillator with its analogue compensation circuit is capable of sub 0.1ppm frequency stability over an extended temperature range and RMS phase jitter down to 0.13ps for IEEE1588 and SyncE applications. It’s unique tilt control ensures lifetime specification compliance, unlike other TCXOs available. Standard Specifications Parameter Frequency stability over temperature Reference to (Fmax + Fmin)/2. The best available stability depends on the nominal frequency and selected operating temperature range ±5% variation Reference to frequency at nominal VCC  HCMOS, ACMOS: ±5pF variation,  Clipped sine wave / Sine wave: ±10% variation reference to frequency at nominal load ±3ppm/10 years ±5ppm/10 years Supply voltage, VCC Current (C/Sine) Current (Sine) Current (HCMOS) Current (ACMOS)

Pluto+ ™ Ultra Stable SMD TCXO SSB Phase Noise (Typical value at 25°C) rah on Model Outline and Recommended Pad Layout RECOMMENDED PAD LAYOUT 5.0±0.2 External Bypassi^O 5 Cap IQOnF fp=H y— Output to Circuit 4 I 1 External AC Coupling Cap 10nF for CS Output SIDE VIEW Do Not Connect / Vc GND Do Not Connect / Vref / Vtemp RF Output Vcc Enable NOTE: Outline unit is mm. * Depending on specification Test Circuit www.rakon.com [email protected] Page 2 of 2