Low Noise Oscillator series Specific request can be addressed to RAKON [email protected] Product Description This Low Noise Oven Controlled Crystal Oscillator available in different footprints from 38x38x22 mm (1.5”x1.5”x0.8”) till 25x22x12 mm (1”x0.8”x0.5”), is specifically designed to meet the request of the most demanding phase noise applications in the instrumentation and defence industries. The LNO 100 @ 100 MHz can be provided with a guaranteed phase noise level of up to -165 dBc/Hz @ 1KHz and a g-sensitivity down to 0.5 ppb/g. Low Noise Oscillator (LNO), Oven Controlled Crystal Oscillator (OCXO) Frequency: 80 to 125 MHz Guaranteed low phase noise @ 100 MHz: -165 dBc/Hz @ 1kHz offset -178 dBc/Hz @ 100kHz offset Supply Voltage: +12V & +15V Pin through hole, SMD package or with connectors Frequency Stability vs. Temperature: ± 0.2ppm Ageing: ± 1.6ppm over 10 years RoHS compliant Typical phase noise curve @ 100 MHz Courtesy Noise XT Reference for phase noise measurement Test equipment Synthesizers Radar Military communication

Low Noise Oscillator series LNO 100 OCXO LNO 100Specifications 1. Environmental conditions 2. Electrica interface Parameters Conditions/remarks Min Nom Max Unit Specifications subject to change without notice

Low Noise Oscillator series LNO 100 OCXO LNO 1004. Minimum Guaranteed Phase Noise level Frequency (MHz) Performance level 100 Hz 1 KHz 10 KHz 100 KHz Unit Specifications subject to change without notice

Low Noise Oscillator series LNO 100 OCXO LNO 100 5.1. Package PTH1 (Pin Through Hole) GND Electrical & mechanical ground GND Electrical & mechanical ground Fout Frequency output Vc Voltage control for electrical tuning Specifications subject to change without notice

Low Noise Oscillator series LNO 100 OCXO LNO 100 5.2. Package PTH2 (Pin Through Hole) 1 Fout Frequency output 4 Vc Voltage control for electrical tuning 5 GND Electrical & mechanical ground Specifications subject to change without notice

Low Noise Oscillator series LNO 100 OCXO LNO 100 5.3. Package PTH3 (Pin Through Hole) Frequency output Electrical & mechanical ground Voltage control for electrical tuning Electrical & mechanical ground Supply voltage Specifications subject to change without notice

Low Noise Oscillator series RELEASED IN AGILE BY WORKFLOW Pin number Name Function Specifications subject to change without notice

Low Noise Oscillator series 5.5. Package SMD1 (Surface Mount Device) Description Voltage Control Not Connected Supply voltage Frequency output Electrical & mechanical ground Specifications subject to change without notice 8/9

Low Noise Oscillator series 6. Ordering part number definition The part number breakdown is defined as follows: = 1.5”x1.5”x0.5” (Pin Through Hole) = 1.5”x1”x0.5” (Pin Through Hole) = 1”x1”x0.5” (Pin Through Hole) = 1.5”x1.5”x0.8” (Pin Side + SMA) = 1”x0.8”x0.5” (SMD) G-sensitivity SG : 2 ppb/g LG : 0.5 ppb/g Temperature range/Stability A = 0°C to +70°C, 0.2 ppm (peak-peak) C = -40°C to +85°C, ± 0.5 ppm Frequency, fnom Standard frequencies: 80, 100, 120, 125MHz LNOs with better ageing, better g-sensitivity can be provided. Specifications subject to change w