Catalog excerpts
Raise3D Premium PLA is a premium PLA designed for all desktop FDM/FFF printers. It ensures consistent extrusion and prevents nozzle jams. Physical Properties
Open the catalog to page 1Bending strength(MPa) All testing specimens were printed using a Raise3D N2 under the following conditions: Printing temperature = 230 ℃, printing speed = 90 mm/s, number of shells = 2, and 100% infill. Testing Geometries Fig 1. Tensile testing specimen Fig 2. Flexural testing specimen Fig 3. Impact testing specimen
Open the catalog to page 2The typical values presented in this data sheet are intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes. Actual values may vary significantly with printing conditions. Enduse performance of printed parts depends not only on materials, but also on part design, environmental conditions, printing conditions, etc. Product specifications are subject to change without notice. Each user is responsible for determining the safety, lawfulness, technical suitability, and disposal/recycling practices of Raise3D materials for...
Open the catalog to page 3All Raise3D catalogs and technical brochures
-
Pro-Series 3D Printer
23 Pages
-
20160330 N1
18 Pages
-
20180323 Pro Series Unboxing
1 Pages
-
Raise3D_Standard_PLA_TDS
1 Pages
-
Raise3D_Premium_ABS_TDS
3 Pages