Raise3D_Premium_ABS_TDS
3Pages

Raise3D Premium ABS is a ABS based filament designed specifically for desktop FDM/FFF 3D printing. It offers superior printing quality, excellent mechanical strength and heat resistance, with moderate printing temperatures and great warping resistance. Physical Properties

Bending strength (MPa) ASTM D790 59.0 ± 1.3 (ISO 179, GB/T 1043) Note: 1. All testing specimens were printed using a Raise3D N2 under the following conditions: Printing temperature = 255 °C, printing speed = 60 mm/s, number of shells = 2, and 100% infill. Testing Geometries Fig 1. Tensile testing specimen Fig 2. Flexural testing specimen Fig 3. Impact testing specimen

Disclaimer The typical values presented in this data sheet are intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes. Actual values may vary significantly with printing conditions. End-use performance of printed parts depends not only on materials, but also on part design, environmental conditions, printing conditions, etc. Product specifications are subject to change without notice. Each user is responsible for determining the safety, lawfulness, technical suitability, and disposal/recycling practices of Raise3D...