Pro-Series 3D Printer
23Pages

{{requestButtons}}

Catalog excerpts

Pro-Series 3D Printer - 1

WARNING This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. RAISE 3D RAISE THE STANDARD

Open the catalog to page 1
Pro-Series 3D Printer - 2

Pro-Series 3D Printer / Quick Start Guide A List of Parts Pro2 Filament Run-out Sensor Filament Feeder Fans Filament Guide Tube Camera Nozzles Touch Screen Air Filter Z Ball Screws Power Inlet Power Switch Filament Run-out Sensor Filament Feeder Fans Filament Guide Tube Touch Screen Z-Stage Power Inlet Wheels Power Switch

Open the catalog to page 2
Pro-Series 3D Printer - 3

Pro-Series 3D Printer / Quick Start Guide Recommend to unclip the Zipties as you are able to reuse the ties later. Please remove the 24 clips holding the extruder assembly in place before powering on your printer. If you fail to remove these clips your printer will be damaged. Please save these clips and re-install them if you transport your printer. Use the 3mm hex wrench to remove the Z axis clamps on both Z axis ball screws. The 3mm hex wrench is packed inside the tool box located inside the top foam. Plug the machine into a wall outlet and power on. The Power cable is packed inside the...

Open the catalog to page 3
Pro-Series 3D Printer - 4

Pro-Series 3D Printer Quick Start Guide The printer will go through a start-up sequence. When the touch screen displays "Home", the printer is ready. Press Z homing button to home the Z print bed to origin position. Take the starter box and filament box out from the base of the printer. And open for standby.

Open the catalog to page 4
Pro-Series 3D Printer - 5

Pro-Series 3D Printer / Quick Start Guide B Hardware Installation (continued) List of Contents Power Cable Heat Resistant Gloves Build Plate (with Build Surface inside Protective Cover) Filament Holder Thumb Screws Other Accessories

Open the catalog to page 5
Pro-Series 3D Printer - 6

Pro-Series 3D Printer / Quick Start Guide B Hardware Installation (continued) 8 Press the downward arrow to move Z platform drop to 50mm. Remove the two thumb screws in front of the build plate with anti-clockwise rotation. Take build plate off from the protective cover. Protective Foam Cover Build Plate

Open the catalog to page 6
Pro-Series 3D Printer - 7

Pro-Series 3D Printer / Quick Start Guide B Hardware Installation (continued) 11 Slide the build plate onto the Z platform. Face the surface with Raise3D logo up. Fix the thumb screws back with clockwise rotation. Install the filament holder in the mounting hole on the side of the printer and place a spool of filament on the holder. NOTE: The filament should be loaded clockwise. D

Open the catalog to page 7
Pro-Series 3D Printer - 8

Pro-Series 3D Printer / Quick Start Guide Feed the filament through the guide tube. Press the "Utilities" menu on the screen and set the temperature of the left nozzle for the filament, then press the "Load" button. Finish the feeding operation step by step according to the instructions on the screen. NOTE: This document is set based on the Raise3D PLA filament, which is delivered together with the printer. Therefore we advise that you use this PLA for testing.

Open the catalog to page 8
Pro-Series 3D Printer - 9

Pro-Series 3D Printer / Quick Start Guide Download ideaMaker The ideaMaker software is available in the USB storage included with your printer. Or go to www.raise3d.com/ pages/download to get the latest version. ^ Open the installer and choose the language. Set a path for installing ideaMaker then click "Next".

Open the catalog to page 9
Pro-Series 3D Printer - 10

Pro-Series 3D Printer / Quick Start Guide C ideaMaker Installation (continued) 2 Follow the instructions and click "Install". After the installation is finished, click "Next" to go to the next step. Click "Finish" and ideaMaker is installed.

Open the catalog to page 10
Pro-Series 3D Printer - 11

Pro-Series 3D Printer / Quick Start Guide Open the Disk Image for the ideaMaker installation in the USB storage included with your printer or get the latest version from www.raise3d.com/pages/download. Drag the icon at left side to the Application icon at the right side.

Open the catalog to page 11
Pro-Series 3D Printer - 12

Pro-Series 3D Printer / Quick Start Guide ^ The first time you open ideaMaker you will need to select your printer model from the drop-down list. 2| Select the diameter of the filament. Press "Finish" to finish the initial settings. NOTE: ALL Pro-Series printers use 1.75mm filaments.

Open the catalog to page 12
Pro-Series 3D Printer - 13

Pro-Series 3D Printer / Quick Start Guide Click the "+" button to import “Giveaway Spinner” included in the USB storage. Click the "Start" or “i” button to begin the slicing of the model. Confirm your printer type and material then select the proper slicing temp

Open the catalog to page 13
Pro-Series 3D Printer - 14

Pro-Series 3D Printer / Quick Start Guide E Using ideaMaker (continued) 4 Click the “Save and Close” after selecting the type of Platform and Support to return to the last menu. Click the “Slice” to start slicing. Save the sliced files (.gcode and .data) to USB storage. NOTE: File names that do not conform to the Western Latin character set may not display properly. Confirm that the files are saved and eject the USB sto

Open the catalog to page 14
Pro-Series 3D Printer - 15

Pro-Series 3D Printer / Quick Start Guide F Start First Print Even though Pro2/Pro2 Plus is preleveled in the factory, please press X/Y axis ‘home’ button first and then Z axis 'home' button to check whether the leveling is changed during shipping. Check the distance between nozzle and printing platform. The optimal distance between the nozzle and the printing platform is 0.2mm. Further Closer The distance between the nozzle and the printing platform can be adjusted by turning the thumb screw on the left-front corner of the Z-plate, the higher the screw stands out, the further the distance...

Open the catalog to page 15
Pro-Series 3D Printer - 16

Pro-Series 3D Printer / Quick Start Guide F Start First Print (continued) The USB storage included with the printer comes loaded with already sliced models. They are a good place to start for your first print. Insert the USB storage into the USB slot on the side of touchscreen. Select “Print” menu, choose “USB Storage” in the file storage path. Select the file to check the printing parameters and settings, then press “Print” to start printing test file. During printing, you can check status, printing time remaining and other parameters from the touchscreen in the “Home” interface. NOTE: The...

Open the catalog to page 16

All Raise3D catalogs and technical brochures

  1. 20160330 N1

    18 Pages