Catalogs >
RAFI GmbH & Co. KG >
Components and Systems for Automation Technologies

Components and Systems for Automation Technologies
8Pages

Catalog excerpts

Components and Systems for Automation Technologies

2 Mobile control unit with membrane keyboard for teaching robots, with 6D mouse, RAFI pushbuttons and RAFIX 16 Emergency-Stop. Control unit in plastic housing with capacitive permission switches. Control system for packaging machine with RAFIX 16 F control components and Ether- CAT interface. Combination of membrane keyboard with RF 19 keys, integration of display, touchscreen and RAFIX 22 FS control components. CUSTOM CONTROL SYSTEMS for Measuring / Control / Regulation Custom input systems ready for connection with electronics and a large number of interfaces. Multi-functional input...

Open the catalog to page 2

Components and Systems for Automation Technologies - 3

3 CUSTOM CONTROL SYSTEMS for Measuring / Control / Regulation Panels with keys and touchscreen for automation technology. Panel for printing machines. Flat data entry keyboard with RACON short-travel keys, display and RAFIX 22 FS Emergency-Stop on one common PCB. Custom control system in robust metal housing for bar machining centre. Optical thread sensor for detection of damage and quality control in textile machines.

Open the catalog to page 3

Components and Systems for Automation Technologies - 4

4 INTELLIGENT CONTROL SYSTEMS for Automation Technologies The modular SMART-Panel system consists of various keyboard / touchscreen input units, which are connected to a 32-bit computer with a fan-less XScale processor. The WINDOWS CE operating system runs on this system. The interfaces Profi Bus, CANBus and Ethernet are offered as standard. All components of this range can be varied according to customers’ requirements. ECU, the SMART-Panel electronic unit. SMART-Touch with touchscreen. The RAFI SMART-Panel range is the basis for fast, cost-effective control and visualization tasks. Custom...

Open the catalog to page 4

Components and Systems for Automation Technologies - 5

5 INTELLIGENT CONTROL SYSTEMS for Automation Technologies Custom SMART-Panel system in control for woodworking machine. Custom control system based on the RAFI SMART-Panel system, combined with control components. Panel on veneer cutting machine. Custom SMART-Panel system in control for woodworking machine.

Open the catalog to page 5

Components and Systems for Automation Technologies - 6

6 SHORT-TRAVEL KEYS for Control / Regulation RAFI supplies high quality electromechanical components for automation technology. Short-travel keys MICON 5, RACON 8/12, RF 15/19 and main switch KN 19 in control systems under overlay or keycap. Absolute reliability with optimum tactile response. RF 15/19 and KN 19 combined with RAFIX 22 FS contact blocks. Short-travel key RACON with plunger in fl at data entry keyboard. MICON under overlay and under keycaps. Keycaps RK 90 over RACON short-travel

Open the catalog to page 6

Components and Systems for Automation Technologies - 7

7 Robust control and signal components for all areas of application. RAFIX 16 with 16 mm mounting hole diameter, RAFIX 22 FS with extremely low mounting depth or RAFIX 22 QR for large currents. Emergency-Stop buttons from the ranges RAFIX 22 QR, RAFIX 16, LUMOTAST 25 and RAFIX 22 FS. RAFIX 22 QR with AS-interface contact blocks. RAFIX 22 FS in terminals of industrial PC. SHORT-TRAVEL KEYS for Control / Regulation Control components RAFIX 22 FS Robust control components with mounting depth of only 9.2 mm with PCB connection, or 27 mm for plug-in connection, provide functional, elegant...

Open the catalog to page 7

Components and Systems for Automation Technologies - 8

RAFI GmbH & Co. KG P.O. Box 2060, 88190 Ravensburg, Germany Tel.: + 49 (0)751/89-0, Fax +49 (0)751/89-1300 www.rafi.de, info@rafi.de Certificates DIN ISO 9001:2000 (DQS) ISO/TS 16949:2002 (DQS) Research Advanced engineering Material testing Electronic development Circuit development Component selection PCB design Software development Design 3D design 2D design Tool and operating materials design Mechanical production Contact technology Plastic injection moulding Metalworking Screen printing Pad printing Manual, semi- and fully-automatic assembly Electronic production Manual and automatic...

Open the catalog to page 8