TRACTOTHAN®

Product catalog summary

Technical Specifications

Shore Hardness A: 93° (± 3) according to ISO 7619
Density: Approximately 1.2 g/cm³ as per ISO 1183
Elongation at Break: Approximately 640% based on DIN 53 504
Stress Value at 100%: 9.0 - 9.5 MPa according to DIN 53 504
Rebound Resilience: 55 - 60% as per DIN 53 512
Tear Strength: 60 - 65 kN/m according to ISO 34
Compression Set: 10 - 11% after 70 hours at 23°C as per ISO 815
Abrasion Resistance: 40 mm³ according to ISO 4649
Coefficient of Friction: 0.15 on wet floor at 8000 N
Rolling Resistance: 0.9 - 1.0% at 20°C
Starting Resistance: 1.2 - 1.5% at 20°C

Note: These values are approximate and derived from standardized tests on special samples. They may vary under different conditions such as temperature, humidity, and deformation rate.

Material Description

TRACTOTHAN® is a composite material similar to VULKOLLAN®, enhanced with special TPU granules for improved wheel grip. This results in better starting properties, reduced slipping, and enhanced braking effects, making it ideal for in-plant transportation and use on wet or soiled surfaces.

Increased braking effect
Reduced risk of sliding
High load capacities
Suitable for high speeds

VULKOLLAN® is a registered trademark of the Covestro Group.

Catalog excerpts

TRACTOTHAN® TRACTOTHAN® is a VULKOLLAN®* composite material developed by us with the same properties as VULKOLLAN®. Special TPU granules incorporated into the tread ensure increased wheel grip, thus improving starting properties, preventing slip and improving braking effects. TRACTO-THAN® is therefore particularly suitable for in-plant transportation and use on wet and soiled surfaces. • Increased braking effect • Reduced risk of sliding • High load capacities • High speeds Technical Informationen Standards Unit All values indicated in this table are approximative values resulting from our own tests or information given by our raw material suppliers. The standardised tests refer to special test samples. Therefore these values are not directly applicable to wheels and castors. Furthermore these values change under such influences as temperature, humidity, duration of charge, rate of deformation, etc. For more information please visit www.raedervogel.de. No legal obligation. * VULKOLLAN® is a registered trademark of the Covestro Group.

Open the catalog to page 1

All RÄDER-VOGEL RÄDER- UND ROLLENFABRIK GMBH & CO. KG catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list