TRACTOSOFT®

Product catalog summary

Technical Specifications

Shore Hardness A: 85° (± 3) according to ISO 7619.
Density: Approximately 1.2 g/cm³ as per ISO 1183.
Elongation at Break: Approximately 605% according to DIN 53 504.
Stress Value at 100%: Ranges from 7.9 to 8.4 MPa as per DIN 53 504.
Rebound Resilience: Between 55% and 60% according to DIN 53 512.
Tear Strength: 42 to 46 kN/m as per ISO 34.
Compression Set: 10% to 11% after 70 hours at 23°C according to ISO 815.
Abrasion Resistance: 41 mm³ as per ISO 4649.
Coefficient of Friction: 0.17 on wet floor at 8000 N.
Rolling Resistance: 0.92% to 1.02% at 20°C of charge (average).
Starting Resistance: 1.22% to 1.52% at 20°C of charge (average).

All values are approximate and derived from internal tests or supplier information. They are not directly applicable to wheels and castors due to varying conditions such as temperature and humidity.

Material Description

TRACTOSOFT® is a composite material similar to VULKOLLAN®, incorporating special TPU granules for enhanced grip, improved starting properties, and better braking effects. It is designed for transportation on wet and soiled surfaces, offering noise reduction and product protection.

Reduced risk of sliding.
Suitable for medium load capacities and speeds.
Preserves floor conditions.

Note: VULKOLLAN® is a registered trademark of the Covestro Group.

Catalog excerpts

TRACTOSOFT® TRACTOSOFT® is a VULKOLLAN®* composite material developed by us with the same properties as VULKOLLAN®. Special TPU granules incorporated into the tread ensure increased wheel grip, thus improving starting properties, preventing slip and improving braking effects. Thanks to the lower Shore hardness of 85° Shore A, TRACTOSOFT® is particularly suited for use in transportation on wet and soiled surfaces where noise reduction and protection of the products being transported are also important factors. • Reduced risk of sliding • Medium load capacities • Medium speeds • Floor preserving Technical Informationen Standards Unit All values indicated in this table are approximative values resulting from our own tests or information given by our raw material suppliers. The standardised tests refer to special test samples. Therefore these values are not directly applicable to wheels and castors. Furthermore these values change under such influences as temperature, humidity, duration of charge, rate of deformation, etc. For more information please visit www.raedervogel.de. No legal obligation. * VULKOLLAN® is a registered trademark of the Covestro Group.

Open the catalog to page 1

All RÄDER-VOGEL RÄDER- UND ROLLENFABRIK GMBH & CO. KG catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list