PEVOPUR® 93° Shore A

PEVOPUR® 93° Shore A

Product catalog summary
Overview: PEVOPUR® is a high-quality polyurethane elastomer known for its excellent dynamic load capacity, high elasticity, and good mechanical wear resistance. It is more resilient than rubber, making it suitable for applications with medium load capacities and speeds, especially in tropical climates.
Specifications:
  • Shore Hardness A: 93° (± 3) as per ISO 7619
  • Density: Approximately 1.2 g/cm³ according to ISO 1183
  • Elongation at Break: Approximately 500% as per DIN 53 504
  • Stress Value at 100%: 8.0 - 8.5 MPa according to DIN 53 504
  • Rebound Resilience: 50 - 55% as per DIN 53 512
  • Tear Strength: 50 - 55 kN/m according to ISO 34
  • Compression Set: 11 - 12% after 70 hours at 23°C as per ISO 815
  • Abrasion Resistance: 41 mm³ according to ISO 4649
  • Coefficient of Friction (Traction) on Wet Floor: 0.1 at 8000 N
  • Rolling Resistance at 20°C: 0.85 - 0.95%
  • Starting Resistance at 20°C: 1.15 - 1.45%
Considerations: The values provided are approximate and derived from standardized tests on special samples. They may not directly apply to wheels and castors and can vary with temperature, humidity, duration of charge, and deformation rate. For further details, visit www.raedervogel.de.
See more

Catalog excerpts

PEVOPUR® 93° Shore A-1

Technical Information PEVOPUR® 93° Shore A PEVOPUR® PEVOPUR® is a high-quality polyurethane • Medium load capacities elastomer which offers good dynamic load • Medium speeds capacity, high elasticity, good mechanical wear resistance and good compressive set quality. PEVOPUR® is also significantly more resilient than rubber. Consequently, the material is particularly suitable for applications with lower requirements and is ideally suited for use in tropical climates. Technical Informationen Standards Unit All values indicated in this table are approximative values resulting from our own tests or information given by our raw material suppliers. The standardised tests refer to special test samples. Therefore these values are not directly applicable to wheels and castors. Furthermore these values change under such influences as temperature, humidity, duration of charge, rate of deformation, etc. For more information please visit www.raedervogel.de. No legal obligation.

 Open the catalog to page 1

All RÄDER-VOGEL RÄDER- UND ROLLENFABRIK GMBH & CO. KG catalogs and technical brochures

  1. CATALOGUE

    91  Pages

  2. PEVOSOFT®

    1  Page

  3. TRACTOSOFT®

    1  Page

  4. TRACTOTHAN®

    1  Page

  5. VULKODYN®

    1  Page

  6. Portrait

    14  Pages

  7. Main Catalogue

    89  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.