PEVODYN® Soft

PEVODYN® Soft

Product catalog summary
Overview: PEVODYN® Soft 78 Shore A is a high-quality polyurethane elastomer designed for high dynamic load capacity with reduced starting and rolling resistance. It is characterized by excellent mechanical properties, including high cutting, tearing, and abrasion resistance, making it suitable for surfaces requiring care and in tropical climates due to its hydrolysis resistance.
Specifications:
  • Hardness: 78 Shore A (± 3) according to DIN ISO 7619-1
  • Density: Approximately 1.2 g/cm³ as per DIN EN ISO 1183-1
  • Elongation at Break: Approximately 500% based on DIN 53 504
  • Stress Value at 100%: 5.0 - 6.0 MPa according to DIN 53 504
  • Rebound Resilience: 75 - 78% as per DIN 53 512
  • Tear Strength: 25 - 30 kN/m according to DIN ISO 34-1
  • Compression Set: 7.0 - 8.0% after 70 hours at 23°C, based on DIN ISO 815-1
  • Abrasion Resistance: 32 mm³ as per DIN ISO 4649
  • Coefficient of Friction: 0.13 on wet floor at 8000 N
  • Rolling Resistance: 0.4 - 0.5% at 20°C
  • Starting Resistance: 0.55 - 0.65% at 20°C
Applications and Benefits:
  • Suitable for medium load capacities and high speeds
  • Offers high energy efficiency
  • Provides good noise reduction and vibration damping
  • Preserves floor surfaces
Important Notes: The values provided are approximate and derived from standardized tests on special samples. They may vary under different conditions such as temperature, humidity, and deformation rate. These values are not directly applicable to wheels and castors.
See more

Catalog excerpts

PEVODYN® Soft-1

Technical Information PEVODYN® Soft PEVODYN® Soft PEVODYN® Soft 78 Shore A is a new high-quality polyurethane elastomer that we have developed with high dynamic load capacity and significantly reduced starting and rolling resistance. The excellent mechanical properties of the material include high cutting, tearing and abrasion resistance. Thanks to its good noise reduction and vibration damping, PEVODYN® Soft is particularly suitable for use on surfaces where care is needed. And with its hydrolysis resistance, the Technical Information Density Elongation at break • Medium load capacities • High speeds • High energy efficiency • ood noise reduction and vibration G damping • Floor preserving material is ideally suited for use in tropical climates. Rebound resilience Determination of tear strength Abrasion resistance Coefficient of friction (traction) on wet floor at 8000 N Rolling resistance at 20°C of charge (average) Starting resistance at 20°C of charge (average) All values indicated in this table are approximative values resulting from our own tests or information given by our raw material suppliers. The standardised tests refer to special test samples. Therefore these values are not directly applicable to wheels and castors. Furthermore these values change under such influences as temperature, humidity, duration of charge, rate of deformation, etc. For more information please visit www.raedervogel.de. No legal obligation.

 Open the catalog to page 1

All RÄDER-VOGEL RÄDER- UND ROLLENFABRIK GMBH & CO. KG catalogs and technical brochures

  1. CATALOGUE

    91  Pages

  2. PEVOSOFT®

    1  Page

  3. TRACTOSOFT®

    1  Page

  4. TRACTOTHAN®

    1  Page

  5. VULKODYN®

    1  Page

  6. Portrait

    14  Pages

  7. Main Catalogue

    89  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.