PEVODYN® Soft

PEVODYN® Soft

Product catalog summary
Overview: PEVODYN® Soft is a high-quality polyurethane elastomer designed for applications requiring high dynamic load capacity and reduced starting and rolling resistance. It is particularly suitable for use on delicate surfaces and in tropical climates due to its hydrolysis resistance.
Specifications:
  • Shore Hardness A: 78° (± 3) according to ISO 7619
  • Density: Approximately 1.2 g/cm³ as per ISO 1183
  • Elongation at Break: Approximately 500% according to DIN 53 504
  • Stress Value at 100%: 5.0 - 6.0 MPa as per DIN 53 504
  • Rebound Resilience: 75 - 78% according to DIN 53 512
  • Tear Strength: 25 - 30 kN/m as per ISO 34
  • Compression Set: 7.0 - 8.0% at 70 h, 23°C according to ISO 815
  • Abrasion Resistance: 32 mm³ as per ISO 4649
  • Coefficient of Friction (traction) on Wet Floor: 0.13 at 8000 N
  • Rolling Resistance: 0.4 - 0.5% at 20°C of charge (average)
  • Starting Resistance: 0.55 - 0.65% at 20°C of charge (average)
Key Features:
  • Medium load capacities
  • High speeds
  • High energy efficiency
  • Good noise reduction and vibration damping
  • Floor preserving
Important Notes: The values provided are approximate and derived from standardized tests on special samples. They may not directly apply to wheels and castors and can vary with environmental factors such as temperature and humidity. For further details, visit www.raedervogel.de.
See more

Catalog excerpts

PEVODYN® Soft-1

RflDER-VOGEI! Ifll Technical Information PEVODYN® Soft PEVODYN® Soft PEVODYN® Soft 78° Shore A is a new high-quality polyurethane elastomer that we have developed with high dynamic load capacity and significantly reduced starting and rolling resistance. The excellent mechanical properties of the material include high cutting, tearing and abrasion resistance. Thanks to its good noise reduction and vibration damping, PEVODYN® Soft is particularly suitable for use on surfaces where care is needed. And with its hydrolysis resistance, the material is ideally suited for use in tropical climates. • Medium load capacities • High speeds • High energy efficiency • Good noise reduction and vibration damping • Floor preserving Technical Informationen Standards Unit All values indicated in this table are approximative values resulting from our own tests or information given by our raw material suppliers. The standardised tests refer to special test samples. Therefore these values are not directly applicable to wheels and castors. Furthermore these values change under such influences as temperature, humidity, duration of charge, rate of deformation, etc. For more information please visit www.raedervogel.de. No legal obligation.

 Open the catalog to page 1

All RÄDER-VOGEL RÄDER- UND ROLLENFABRIK GMBH & CO. KG catalogs and technical brochures

  1. CATALOGUE

    91  Pages

  2. PEVOSOFT®

    1  Page

  3. TRACTOSOFT®

    1  Page

  4. TRACTOTHAN®

    1  Page

  5. VULKODYN®

    1  Page

  6. Portrait

    14  Pages

  7. Main Catalogue

    89  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.