PEVODYN® 93° Shore A

PEVODYN® 93° Shore A

Product catalog summary
Overview: PEVODYN® is a high-quality polyurethane elastomer designed for reduced starting and rolling resistance, high dynamic load capacity, and suitability for intra-logistic applications, especially in tropical climates due to its hydrolysis resistance.
Specifications:
  • Shore Hardness A: 93° (± 3) as per ISO 7619
  • Density: Approximately 1.2 g/cm³ according to ISO 1183
  • Elongation at Break: Approximately 520% as per DIN 53 504
  • Stress Value at 100%: 8.5 - 9.0 MPa according to DIN 53 504
  • Rebound Resilience: 63 - 70% as per DIN 53 512
  • Tear Strength: 40 - 50 kN/m according to ISO 34
  • Compression Set: 10 - 11% after 70 hours at 23°C as per ISO 815
  • Abrasion Resistance: 36 mm³ according to ISO 4649
  • Coefficient of Friction (Traction): 0.1 on wet floor at 8000 N
  • Rolling Resistance: 0.5 - 0.6% at 20°C of charge (average)
  • Starting Resistance: 0.65 - 0.75% at 20°C of charge (average)
Key Features:
  • Long service life
  • High load capacities
  • High speeds
  • High energy efficiency
Important Notes: The values provided are approximate and derived from standardized tests on special samples. They may vary under different conditions such as temperature, humidity, and deformation rate. These values are not directly applicable to wheels and castors.
For more information, visit www.raedervogel.de.
See more

Catalog excerpts

PEVODYN® 93° Shore A-1

PEVODYN® PEVODYN® is a new high-quality polyurethane elastomer which we have developed, to offer a significantly reduced starting and rolling resistance as well as high dynamic load capacity. The material is therefore particularly suitable for intra-lo-gistic applications. Thanks to its hydrolysis resistance, PEVODYN® is perfectly suited for use in tropical climates. • Long service life • High load capacities • High speeds • High energy efficiency Technical Informationen Standards Unit All values indicated in this table are approximative values resulting from our own tests or information given by our raw material suppliers. The standardised tests refer to special test samples. Therefore these values are not directly applicable to wheels and castors. Furthermore these values change under such influences as temperature, humidity, duration of charge, rate of deformation, etc. For more information please visit www.raedervogel.de. No legal obligation.

 Open the catalog to page 1

All RÄDER-VOGEL RÄDER- UND ROLLENFABRIK GMBH & CO. KG catalogs and technical brochures

  1. CATALOGUE

    91  Pages

  2. PEVOSOFT®

    1  Page

  3. TRACTOSOFT®

    1  Page

  4. TRACTOTHAN®

    1  Page

  5. VULKODYN®

    1  Page

  6. Portrait

    14  Pages

  7. Main Catalogue

    89  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.