Catalogs >
RAE Systems >
VOC Zeroing Tube

VOC Zeroing Tube
2Pages

Catalog excerpts

1339 Moffett Park Dr. Tube Orders 1-888-723-8823 Sunnyvale, CA 94089 USA Web www.raesystems.com Tube Data Sheet VOC Zeroing Tube No. 025-2000-010 This tube is used to purify ambient air to form a zero standard for calibrating VOC detectors in ambient background. Calibration should be performed at the same temperature, humidity and flow as the measurement. To connect to a ppbRAE or MiniRAE 2000, use Inlet Tube Adapter p/n 025-3002-000 according to the instructions on the reverse side. See Technical Notes 150, 172 and 178 for more details on use and how to connect other monitors. Storage Life: 3 years Temperature Range: -10 to +50°C Filtering efficiency for VOCs: a Measured with ppbRAE after 2-min. exposure. *This tube can not remove methane, ethane or ethylene. (Methane measured with and LEL sensor.) Cautions: • Single use only. • Attach tube shortly before zeroing to avoid loss of adsorption capacity. • Will not absorb CO; partially absorbs H2S. May not absorb some other inorganic compounds. File N:\Tubes\Data SheetsNew\VOC zeroing tube 025-2000-010

Open the catalog to page 1

RAE Systems, Inc. 1339 Moffett Park Dr. Sunnyvale, CA 94089 USA Telephone 408-752-0723 Tube Orders 1-888-723-8823 Web www.raesystems.com Connection to MiniRAE 2000 or ppbRAE Connection to MiniRAE Plus or UltraRAE Connection to Multi-gas monitors Zeroing Procedure 1) Insert the tip of the Flex-I-Probe or other probe into the smaller end of the Tube Adapter 2) Break the two ends of a VOC zeroing tube using the smaller hole on the side of the Tube Adapter 3) Insert one end (black arrow indicates the right direction) of the open VOC zeroing tube into the bigger end of the adapter; 4) Run the...

Open the catalog to page 2