The FMC-40 is a controller for up to 4 fixed gas detection sensors. Custom configurable with up to 4 channel cards, the FMC-40 provides accurate and reliable readings from a variety of fixed gas detection sensors including O2, H2S, CO, SO2, LEL and more. Integrated Low, High, and Fault dry contact relays provide flexibility in configuring an alarm and safety system. The FMC-40 is easy to configure and provides a real-time display of the gas sensor readings on the integrated LCD screen. • Steel mills • Flexible System Configuration • Waste water • Detects flammable, oxygen or toxic gases • Paint spray booths • Plug in sensor channel cards • Chemical plants • Chemical storage • Selectable alarm relays • Aircraft hangars • Boiler rooms • Delay to alarm options • Dedicated channel card for each detector (up to 4 total) • Integrated low, high, and fault dry-contact relays • Real-time readings via LCD display • Easy to configure and install

Combustible Gas - L.E.L., % vol, ppm Controller IP 65 option Toxic Gas - ppm, % vol F05-0022-000 Oxygen - % vol Depletion/Enrichment Any 4~20mA input signal Alarm card for 4-20mA Power supply 230/115v AC or 24v DC and specials transmitters F05-3021-000 Power Consumption 12 watts - full alarm Indicators Power - Green L.E.D Battery back up 1 hour 1 to 4 Channel Gas Mains Fail - power indicator change green to amber Alarm F05-3022-000 Alarms - Red L.E.D.s Fault - Amber L.E.D Digital Display - 31/2 Digit - gas readout Sensor channel selection indicator - Amber L.E.D Specifications System test - Alarm...