FMC-10 Single Point Gas Alarm The FMC-10 is a single-point controller for fixed gas detection sensors. Simple and economical, the FMC-10 provides accurate and reliable readings from a variety of fixed gas detection sensors, including O2, H2S, CO, SO2, LEL and more. Integrated Low, High, and Fault dry-contact relays provide flexibility in configuring an alarm and safety system. The FMC-10 is easy to configure and provides • Full-Featured single-gas controller • Unequaled cost-of-ownership value • Integrated low, high, and fault dry-contact relays a real-time display of the gas sensor readings on the integrated • Real-time readings via LCD display LCD screen. The FMC-10 can be either wall or panel mounted. • Easy to configure and install • Petrochemical industry • Detects flammable, oxygen or toxic gases • Chemical industry • Wall or panel mount • Storage facilities • Two alarm stages and relays • Process plants • Compact size • Waste water treatment • 4-20mA analog output • Delay to alarm options Durable • Extensive fault-detection circuitry

Any 4~20mA input signal may be utilised simul The two voltages Fault - Amber L.E.D. Indicators Power Consumption Digital Display 31/2- Digit 4 watts full alarm System Test - Alarm L.E.D.s flashing Power - Green L.E.D. and fault alarm relays -SPCO Outputs Low, High Switch on delay power indicator flashing - 45 sec de-energised - energised option Alarm relay inhibit - Fault L.E.D. on Lo Red L.E.Ds Alarms Lo/Hi - gas alarm relay SPCO normally energ Audible Alarm Low, High and Fault Alarms de-energised option Fault - Amber L.E.D. Power Supply 230/115v AC 50/60 Hz or 24vDC System - stand Test latched...