PAN1311
2Pages

{{requestButtons}}

Catalog excerpts

PAN1311 - 1

OUTLINES - ENW89810J5CF Now you can integrate Bluetooth very easy in your final ,v-.1.: product, with the PAN1311-SPP as a full Bluetooth system solution. In comparison to our pin compatible HCI solution (PAN1310), there is no longer a powerful host needed. The PAN1311 is manufactured in a 11,6 x 8,7 x 1.8 mm3 SMD LGA package with shielded case and will be qualified to the Bluetooth 2.0 standard. Due to a very low price PAN1311 is well suited for units produced in all quantities, with the simple AT command set you are able to integrate PAN1311 into your application. This module follows the national and international regulations, e.g. EMC, Safety, EN300328, FCC. FEATURES General - Supported Profiles: RFCOMM, SPP device A and B - Complete Bluetooth 2.0 + EDR solution - Ultra low power design - Temperature from -40°C to +70°C, optional +85°C (Industrial Range) - No external components except antenna is needed - Integrates ARM7TDMI, RAM and patchable 256k EEPROM (for device configuration data and application) - On-module voltage regulator. External supply 2.7-3.6V - Reference clock included - Low power clock from internal oscillator or external low power clock Interfaces - 3.25 MBaud UART - General purpose I/Os with interrupt and wake-up capabilities - JTAG for boundary scan and debug Bluetooth - Scatternet with one slave role while still being visible - Power control and RSSI - Sniff mode, Adaptive Frequency Hopping and Quality of Service ORDERING CODE - PAN1311 with SPP and max. +70°C ENW89810J5CF - PAN1311 with SPP and max. +85°C (on request for higher demand) Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. If there is any doubt regarding the safety of this product, kindly inform us immediately for technical consultation. PAN1311 Rev. B1 www.pedeu.panasonic.de wireless@eu.panasonic.com Hardware Status Mass Production

Open the catalog to page 1
PAN1311 - 2

CONTACT Carsten Pfaff BlueTooth Product Manager Radiometrix Ltd Hartcran House 231 Kenton lane, Harrow, Middlesex HA3 8RP, England. Tel: +44 (0)20 8907 5077 Fax: +44 (0)20 8909 2233 email: carsten@radiometrix.co.uk All Wireless Applications - Printer Adapters and Scanners - Printers - Access Points - Wireless Sensors - Cable Replacement - Personal Digital Assistants (PDAs) - PC Motherboards & - Peripherals - Industrial Applications TECHNICAL CHARACTERISTICS Parameter (1) Figure indicates maximum possible data rate with this packet type www.pedeu.panasonic.de wireless@eu.panasonic.com...

Open the catalog to page 2

All Radiometrix catalogs and technical brochures

  1. LNM2H

    13 Pages

  2. NiM1B

    13 Pages

  3. VX2M

    9 Pages

  4. WRX2C

    9 Pages

  5. MSR3

    8 Pages

  6. LMR0

    10 Pages

  7. SAT3

    5 Pages

  8. NTX2B

    13 Pages

  9. NTX0

    8 Pages

  10. MTX3

    10 Pages

  11. MTX2

    10 Pages

  12. BiM3H

    8 Pages

  13. QPX1

    8 Pages

  14. QPT1

    8 Pages

  15. AiM1

    9 Pages

  16. M1144

    8 Pages

  17. DXT / DXR

    7 Pages

  18. BL118

    7 Pages

  19. BD118

    5 Pages

  20. PAN1310

    2 Pages

  21. m48a

    11 Pages

  22. LMR2

    11 Pages

  23. TDL3F

    10 Pages

  24. krx2

    9 Pages

  25. KTX2

    8 Pages

  26. RPM3

    15 Pages

  27. ENX1

    11 Pages

  28. NiM2

    11 Pages

  29. BiM1

    15 Pages

  30. RX3G

    6 Pages

  31. PLR2

    12 Pages

  32. MSR3

    8 Pages

  33. CXR2

    12 Pages

  34. COR3

    8 Pages

  35. TX2S

    7 Pages

  36. CXT2

    12 Pages

  37. KRX2

    9 Pages

  38. KFX2

    4 Pages

  39. KDEC

    5 Pages

  40. TXL2

    11 Pages

  41. Radiometrix

    20 Pages