• Supports up to 5 relays for controlling devices up to 8A, 250VAC/30VDC.
• Includes volt-free changeover contacts and a learn button for up to 16 transmitters.
• Visual indicators for learn function, low supply voltage, and activated relays.
• Offers momentary or latched outputs with a basic antenna for plug-and-play setup.
• Operates on a 9-16VDC supply with specific current consumption rates.

• Used in security and alarm systems, industrial controls, HVAC controls, and wireless door entry systems.

The KDEC is optimized for use with KFX2 or KTX2 modules, allowing for different relay output functionalities. It supports momentary or latched relay actions, selectable via a jumper link.

• LEDs indicate relay activation, low battery, learn status, and power presence.

• Transmitter learning involves a brief button press, storing the transmitter and function code in memory.
• Relay activation is based on learned transmitter signals, with options for momentary or latched outputs.

Memory can be cleared by holding the learn button for over 6 seconds, but individual transmitters cannot be removed.

• Jumper T determines optimization for key-fob or module use, while Jumper M selects relay mode.

Exercise caution when handling electrical connections to prevent electric shock.

Messages use Manchester encoding with a 1250bps rate, including a 28-bit serial number and a 32-bit encrypted hop-code. Synchronization with transmitters is crucial for security.

Standard frequency band is 433 MHz, with other options available upon request.

Product complies with R&TTE Directive requirements. Not recommended for life-critical applications.