Catalog excerpts
These simple application boards use the firmware and signalling protocols of the existing CXTCXR odule products, interfaced with a choice of SIL package radio modules. A single relay output is provided, controlled by a pair of logic (or switch) inputs on the transmitter. Latched or momentary operation is selectable. The data format employed has a 16 bit address, which can be user programmed via an RS232 compatible input Figure 1: DX series remote control boards Range of Features ■ Programmable 16 bit address ■ 1 relay to control mains powered devices rated up to 8A, 250VAC/30VDC ■ Visual indication of valid code received and active relays ■ RF module range testing ■ Momentary, Latched outputs ■ Setup is simple as Plug-and-Play ■ RF Remote Control Demonstration ■ Can be used with any Radiometrix SIL pinout transmitters and receivers Applications ■ Security and Alarm systems ■ Emergency assistance call system ■ Status reporting and monitoring systems ■ RF Remote control systems ■ Industrial controls ■ HVAC controls ■ Simple On/Off switching ■ Long range telecontrol with Narrow Band FM radios Radiometrix Ltd DX series control boards p
Open the catalog to page 1Radiometrix Ltd DX series control boards page 2
Open the catalog to page 2To successfully program the unit it must be in active state A receiver board must simply be powered A transmitter board must be powered, with BOTH inputs grounded (in this state it will listen to the serial pin, but will not transmit) Each command sequence must end with a carriage return (ascii 13) Radiometrix Ltd DX series control boards page 3
Open the catalog to page 3Ordering Information Radiometrix Ltd DX series control boards page 4
Open the catalog to page 4DX series control boards
Open the catalog to page 5DX series control boards
Open the catalog to page 6Copyright notice This product data sheet is the original work and copyrighted property of Radiometrix Ltd. Reproduction in whole or in part must give clear acknowledgement to the copyright owner. Limitation of liability The information furnished by Radiometrix Ltd is believed to be accurate and reliable. Radiometrix Ltd reserves the right to make changes or improvements in the design, specification or manufacture of its subassembly products without notice. Radiometrix Ltd does not assume any liability arising from the application or use of any product or circuit described herein, nor for...
Open the catalog to page 7All Radiometrix catalogs and technical brochures
-
LNM2H
13 Pages
-
NiM1B
13 Pages
-
VX2M
9 Pages
-
WRX2C
9 Pages
-
MSR3
8 Pages
-
LMR0
10 Pages
-
SAT3
5 Pages
-
NTX2B
13 Pages
-
NTX0
8 Pages
-
MTX3
10 Pages
-
MTX2
10 Pages
-
BiM3H
8 Pages
-
QPX1
8 Pages
-
QPT1
8 Pages
-
AiM1
9 Pages
-
Universal Evaluation Kit
27 Pages
-
TDL2A Evaluation Kit
4 Pages
-
SPM2/RPM Evaluation Kit
7 Pages
-
SP2 Evaluation Kit
12 Pages
-
M48A Application Board
12 Pages
-
M1144
8 Pages
-
Control44 Evaluation Kit
7 Pages
-
CTA28 App. boards
11 Pages
-
BL118
7 Pages
-
BD118
5 Pages
-
PAN1311
2 Pages
-
PAN1310
2 Pages
-
m48a
11 Pages
-
LMR2
11 Pages
-
TDL3F
10 Pages
-
krx2
9 Pages
-
KTX2
8 Pages
-
RPM3
15 Pages
-
ENX1
11 Pages
-
NiM2
11 Pages
-
BiM1
15 Pages
-
RX3G
6 Pages
-
PLR2
12 Pages
-
MSR3
8 Pages
-
CXR2
12 Pages
-
COR3
8 Pages
-
TX2S
7 Pages
-
CXT2
12 Pages
-
KRX2
9 Pages
-
KFX2
4 Pages
-
KDEC
5 Pages
-
TXL2
11 Pages
-
Radiometrix
20 Pages