Sub 1GHz Multichannel Radio Transceiver with Hirose antenna connector It is a low cost sub 1GHz multichannels transceiver designed for low-consumption wireless applications. The hardware is based on Silicon Labs Si 1000 component. The main features of this device are: Output power up to +20 dBm (lOOmWatt) Microcontroller Integrated (8051 core), modulation selectable (OOK, FSK, GFSK), RadioControlli has developed an WSN (wireless sensor network) architecture of a network of control and measurement. This application allows to manage and customize the WSN via the UART interface connected to a host system. Technical Characteristics ls Supply Current ( RX mode / TX mode) ls Assorbimento Corrente (TX mode / +20dBm) ls Assorbimento Corrente (TX mode / 0 dBm ) Assorbimento Corrente sleep mode Startup Time (Sleep to RX/TX mode) Operating Temperature Range RF Sensitivity (1.2 Kb/sec Data Rate) RX Frequency Range CEPT/ERC/REC 70-03 - Wireless security systems - Home and building automation - Automatic Measure Reading - Industrial Control and Monitoring - Wireless Sensor Network Bidirectional multichannel Link High Speed 8051 uC Core. The information contained in this document may be changed without notice.

Mechanical dimensions SCHEMATIC CIRCUIT BLOCK SILICON LABS Antenna HIRose Antenna connection The information contained in this document may be changed without notice.

The wireless network for control and measurement denominated SENS0NET is composed from a gateway and from a series of unit for Control and Measurement at Low Power (sensor) connected at Each Unit for Control and Measurement (sensor) is characterized by a unique address "sensor address" and the address of a gateway that can communicate "gateway address". SENS0NET can be managed by an external control unit (an embedded system or a PC) connected to the gateway via UART interface. SENS0NET integrates the low consumption technology. SENS0NET can be customized according to customer requirements (firmware),...

SENSOR Application Note Mechanical dimensions Antenna HIRose Antenna connection The information contained in this document may be changed without notice.