adio at ontrolli Long Range Bidirectional Remote Control 433.92MHz Long range bidirectional system, composed by a bidirectional remote control (TX unit) and a RX unit with the possibility of switching 4 relays. This bidirectional control system has been designed for the various needs of installers and electricians, it can be used to activate all types of lighting, as well as other applications such as water games, electric gates and automatic doors. The remote control (4 keys) has both the ability to transmit and receive (bidirectional), a feature that makes it unique compared to other radio controls, it allows the user to check the status of the relay even remotely (green indicator, relay switched, indicator red relay not switched) and even to switch the single relay. Each time a relay activation command is sent, there is a visual confirmation as to whether the activation operation was successful or not (return receipt). Distance: About 1000 meters in open field. Applications : Characteristics: - Lighting - Home automation systems - Access control - Industrial automation - Alarm systems - Confirmation sent command (return receipt). - Possibility to interrogate the RX unit and check the status of the 4 channels. - Distance: About 1000 meters in open field. Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

TBLO-433Long Range Bidirectional Remote Control 433.92MHzPART NUMBER : TBLO-433-4-KPART NUMBER : TBLO-433-4-E composed by: - N. 1 Commercial Relay Card (4 relay) - N. 2 Bidirectional Remote Control (4 keys) - N. 1 Power supply 5 Volt - N. 1 Connection cable composed by : - N. 1 Commercial Relay Card (4 relay) - N. 1 Bidirectional Remote Control (4 keys) - N. 1 Power supply 5 Volt Power Supply 5Volt RCAT-433 RX Unitne Technical Characteristics (*) On request is possible to change/modify the operative frequency (step of 100KHz). Radiocontrolli s.r.l refuses any responsibility for irregular uses...

Long Range Bidirectional Remote Control 433.92MHz Wireless Modules 1.0 RX Unit descriptionSMA Connector Transceiver ModuleOUT Connector TX Code “ The antenna RadioControlli RC-ANT-XXX-SMA is mounted on this connector Transceiver Module Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for any possible lack or inaccuracy of the data and reserves the right to change in whole or in part these information without notice.

adio ontrolliWireless Modules 2.0 Remote Control Description Transceiver Module 2.1 Mechanical DimensionDescription Bicolor Led Radiocontrolli s.r.l refuses any responsibility for irregular uses of the devices and for Pag- 4 1 8 any possible lack or inaccuracy of the data and reserves the right to change in whole www.raflloComro||l.com or in part these information without notice. Rev 15

Long Range Bidirectional Remote Control 433.92MHz Wireless Modules Check Status: Press a button for about 1 second, in this way you can check the status of the corresponding relay: GREEN = relay not activated RED= activated. Switching: Press a button for more than one second, the corresponding relay will switch and it is possible to check the feedback (via the two-color LED) of the successful switching. Each time a button is pressed, a visual confirmation is provided as to whether the activation operation was carried out or not (return receipt). Video : To know more about the features of this...

TBLO-433 Long Range Bidirectional Remote Control 433.92MHz ontrolli Wireless Modules 4.0 Mode of association Remote Control / Rx Unit The remote controls are already associated with the receiving unit from the factory, if it is necessary to modify this association or make an association with another receiving unit, follow the procedure below: 1) Disassemble the remote control , by unscrewing the three screws indicated in the figure: 2) Make the jumper as shown in the figure 3) Carry out the following jumper on the receiver board, LED D8 will flash red Radiocontrolli s.r.l refuses any responsibility...

TBLO-433 Long Range Bidirectional Remote Control 433.92MHz ontrolli Wireless Modules 4) The flashing of LED D8 indicates that the receiving unit is sending air association messages addressed to the remote controller. During this flashing, simultaneously press the following keys on the remote control to be associated. 5) The two-color LED will flash three times in red and then it will light up in green color, this means that the association was successful. Remove the jumper previously made on the remote control. Remove the jumper previously made on the receiving unit. Radiocontrolli s.r.l refuses...

Long Range Bidirectional Remote Control 433.92MHz Wireless Modules 5.0 Monostable / bistable operation By default the receiver is configured with the 4 channels in MONOSTABLE mode. MONOSTABLE mode means that the receiving unit changes the state of the output each press of the single button on the remote control. Command of relay deactivation Command of Relay activation Through the jumpers RL1 ÷ RL4 it is possible to configure the four channels also in BISTABLE mode. ON BISTABLE mode means that when the receiver receives a frame from one of the memorized remote controls, it activates the output...